摘要
为了对长输管道压缩机厂房内可燃气体泄漏进行定量分析,使用CFX软件,对长输管道压气站压缩机厂房内的可燃气体泄漏进行了数值模拟计算。计算中介质为中亚天然气和常温常压下的空气,采用标准的κ-ε双方程湍流模型,对压缩机厂房内潜在泄漏点发生泄漏时进行计算。研究结果表明,可燃气体在厂房顶部呈"倒7"型分布,除泄漏点周围外,可燃气体含量最大的区域贴近屋顶处,该研究为压缩机厂房内可燃气体探测器的布置提供了量化的参考。计算结果得到了厂房内可能存在的可燃气体聚集点,并针对性地增设了通风口,消除了可燃气体聚集情况。
In this paper,CFX software was used to simulate and quantitatively analyze the leakage of combustible gas in the compressor workshop of long distance pipeline.During the calculation,the medium was set as Central Asian gas and air at normal temperature and atmospheric pressure.The standardκ-εturbulence model was adopted to calculate the leakage of combustible gas at leakage point.The results showed that the combustible gas was "inverted 7" type distribution on the top of the workshop.The area of the combustible gas with maximum concentration was located near roof when the leak point zone was excluded.This study provided a quantitative reference for combustible gas detector arrangement in the compressor workshop.Besides,the simulation demonstrated the possible accumulation points of combustible gas in the plant,and suggested the installation of ventilation point to eliminate the risks.
出处
《石油与天然气化工》
CAS
北大核心
2018年第1期115-120,共6页
Chemical engineering of oil & gas
关键词
压缩机厂房
CFD模拟计算
可燃气体
长输管道
通风
compressor workshop
CFD simulation
combustible gas
long distance pipeline
ventilation port
