期刊文献+

燃料元件破损在线监测装置的试验研究 被引量:1

The Test of Online Monitoring Device for Fuel Element Rupture
在线阅读 下载PDF
导出
摘要 为进一步进行燃料元件故障监测技术研究,开展了燃料元件破损在线监测装置在HFETR上的试验研究工作。本文对试验结果进行了讨论与分析,发现了"碘坑"现象和启堆时135 Xe中毒现象,这两个现象都与理论分析结论一致。同时也将装置监测的结果与实验室取样测量结果进行对比,发现装置的监测结果与实验室测量结果符合较好。试验研究表明,燃料元件破损在线监测装置具备了在一回路水复杂环境下连续跟踪目标核素进行定性及定量监测的能力,具备了在实际工程应用能力。 In order to study the technology of fuel element rupture monitoring further, the test of the online monitoring device for fuel element rupture on HFETR was done. This paper described the test results and analysis. The iodine well phenomenon and xenon poisoning phenomenon were found, and there were agreed with theory. Moreover, the monitoring results of the prototype also accord with laboratories results. So the test results confirmed that the device have a ability of monitoring target nuclides in primary loop.
出处 《核科学与工程》 CSCD 北大核心 2017年第6期1033-1038,共6页 Nuclear Science and Engineering
关键词 元件破损 在线监测 HFETR 试验 目标核素 Fuel element rupture Online monitoring HFETR, Test Target nuclides
  • 相关文献

参考文献4

二级参考文献16

  • 1陈彭,王华荣,张培生.压水堆堆内试验仪表化燃料元件初始温度分布计算程序[J].原子能科学技术,2003,37(z1):157-160. 被引量:1
  • 2王月兴,马晓林,云昌全,曲善奎.元件破损实时监测与分析中裂变产物光子能量的选择[J].核技术,1996,19(6):343-348. 被引量:5
  • 3闫学昆,刘明健,贾铭椿,张燕,龚军军.NaI多道脉冲幅度分析系统在燃料元件破损监测中的应用研究[J].核科学与工程,2006,26(3):239-242. 被引量:7
  • 4李德平,辐射防护手册.第1分册,1987年
  • 5团体著者,核素常用数据表,1977年
  • 6高物,应用γ射线能谱学,1977年
  • 7李小川. 燃料组件泄漏问题[R]. 广东:大亚湾核电站,1996.Li Xiaochuan. The Problems of Fuel Assembly Leakage[R]. Guangdong: Daya Bay Nuclear Power Plant, 1996(in Chinese).
  • 8唐纳德·奥兰德.核反应堆燃料元件基本问题[M]. 李恒德,潘金生,柳百新, 等译. 北京:原子能出版社, 1983.428~438.Olander DR. Fundamental Aspects of Nuclear Reactor Fuel Elements[M]. Li Hende, Pan Jinsheng, Liu Baixin, et al. Beijing:Atomic Energy Press, 1983. 428~438(in Chinese).
  • 9Marcin SZUTA. Defect Trap Model of Fission Gas Behavior in UO2 Fuel During Irradiation [R]. Otwock-Swierk: Institute of Atomic Energy, 2003.
  • 10闫学昆.反应堆燃料元件破损监测技术研究[D].武汉:海军工程大学,2006.

共引文献46

同被引文献9

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部