期刊文献+

12kV真空断路器半双稳态永磁机构的设计 被引量:4

Design of half bistable permanent magnetic actuator used in 12kV vacuum circuit breaker
在线阅读 下载PDF
导出
摘要 应用于真空断路器的永磁操动机构一般分为双稳态和单稳态永磁机构。对于单稳态永磁机构,通过调整分闸弹簧在分闸位的预拉力,可以实现对分闸特性的调节。增大预拉力可以缩短分闸时间,降低分闸弹跳,但预拉力过大会导致合闸状态时的保持合力减小,可能造成合闸的不可靠,也会对合闸动态特性造成不利影响,如合闸时间增加等。本文提出了应用于12kV真空断路器的半双稳态永磁机构的设计方法,该机构在分闸状态由较小的永磁保持力和弹簧力共同实现分闸保持。分闸位保持力大有助于抑制分闸弹跳,同时永磁保持力在动铁芯离开分闸位置后迅速减小,对合闸保持以及合闸动态特性几乎没有不利影响。利用Ansoft Maxwell软件建立永磁机构模型,进行静态和动态的仿真。根据设计结果制作实际样机,对其进行测试,实验结果验证了设计与仿真的正确性。 The permanent magnetic actuator used in vacuum circuit breaker is generally divided into bistable state and single steady state permanent magnetic actuator. For the single steady state permanent magnetic actuator, it can achieve the regulation of break-brake characteristics by adjusting the pretension of the break-brake spring in the open position. Increasing the pretension can shorten the opening time and reduce the switch-off bounce. But if the pretension is too large, it will lead to the decrease of the resultant force in the closing state, and this may cause the unreliability of closing operation. The pretension will be also unfavourable to the dynamic characteristics of the clos- ing process, such as the increase of the closing time,etc. This paper presents the design method of a half bistable permanent magnetic actuator used in 12kV vacuum circuit breaker, and the actuator maintains in the opening posi- tion by a small permanent magnetic retaining force and a spring force. Large retaining force in the open position helps to restrain the switch-off bounce. At the same time, the permanent magnetic retaining force decreases rapidly after the moving iron core leaves the open position, and it almost has no adverse effects on the closing retaining force and the dynamic characteristics of the closing process. Ansoft Maxwell software is used to establish the model of permanent magnetic actuator to carry out the static and dynamic simulation. An actual prototype has been made according to the results of the design, and it has been tested. The results have verified the correctness of the design and the simulation.
出处 《电工电能新技术》 CSCD 北大核心 2017年第4期29-36,共8页 Advanced Technology of Electrical Engineering and Energy
关键词 永磁机构 半双稳态 设计 真空断路器 permanent magnetic actuator half bistable state design vacuum circuit breaker
  • 相关文献

参考文献5

二级参考文献13

  • 1王秋良,Gebhard Moritz.加速器二极磁体的应力和磁场分析(英文)[J].电工电能新技术,2004,23(3):13-17. 被引量:2
  • 2林莘(Lin Xin).现代高压电器技术(Modem High Voltage Electrical Apparatus Technology)[M].北京:机械工业出版社(Beijing:China Machine Press),2002..
  • 3Micromachined accelerometer MMA7260Q datasheet[Z].Freescal semiconductor.Inc.,2005.
  • 4周茂祥 (Zhou Maoxiang).低压电器设计手册 (Low voltage apparatus design manual)[M].北京:机械工业出版社 (Beijing:China Machine Press),1992.
  • 5S-H Park,J Lee,J Yoo.Effects of design and operating parameters on the static and dynamic performances of an electromagnetic valve actuator[J].Proc.Instn Mech.Engrs,J Automobile Eng.,2003,217(3):193-201.
  • 6汤敬秋 (Tang Jingqiu).电磁操动机构中凸轮机构的设计及仿真 (Design and simulation of electromagnetic actuator's cam machine)[D].保定:华北电力大学 (Baoding:North China Elec.Power Univ.),2004.
  • 7贾峰 (Jia Feng).交流接触器三维电磁场分析 (Study on 3D finite element analysis for electromagnetic mechanism of AC contactor)[D].天津:河北工业大学 (Tianjin:Hebei Univ.of Tech.),2009.
  • 8王海潮,张继华,郭凤仪,王宏伟,王继强.新型永磁操动机构智能交流接触器的研究[J].低压电器,2009(5):8-11. 被引量:7
  • 9胡辉,杨旗,包斌,何俊佳,李劲.基于ANSYS的空气电弧放电等离子体温度数值模拟[J].电工电能新技术,2009,28(2):20-23. 被引量:8
  • 10安涛,王庆丰,唐建中,姚明.断路器操动机构仿真模型在故障诊断中的应用[J].电工电能新技术,2010,29(1):41-44. 被引量:12

共引文献62

同被引文献76

引证文献4

二级引证文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部