期刊文献+

Boron-doped microporous nano carbon as cathode material for high-performance Li-S batteries 被引量:4

Boron-doped microporous nano carbon as cathode material for high-performance Li-S batteries
原文传递
导出
摘要 In this study, a boron-doped microporous carbon (BMC)/sulfur nanocomposite is synthesized and applied as a novel cathode material for advanced Li-S batteries. The cell with this cathode exhibits an ultrahigh cycling stability and rate capability. After activation, a capacity of 749.5 mAh/g was obtained on the 54t" cycle at a discharge current of 3.2 A/g. After 500 cycles, capacity of 561.8 mAh/g remained (74.96% retention), with only a very small average capacity decay of 0.056%. The excellent reversibility and stability of the novel sulfur cathode can be attributed to the ability of the boron-doped microporous carbon host to both physically confine polysulfides and chemically bind these species on the host surface. Theoretical calculations confirm that boron-doped carbon is capable of significantly stronger interactions with the polysulfide species than undoped carbon, most likely as a result of the lower electronegativity of boron. We believe that this doping strategy can be extended to other metal-air batteries and fuel cells, and that it has promising potential for many different applications. In this study, a boron-doped microporous carbon (BMC)/sulfur nanocomposite is synthesized and applied as a novel cathode material for advanced Li-S batteries. The cell with this cathode exhibits an ultrahigh cycling stability and rate capability. After activation, a capacity of 749.5 mAh/g was obtained on the 54t" cycle at a discharge current of 3.2 A/g. After 500 cycles, capacity of 561.8 mAh/g remained (74.96% retention), with only a very small average capacity decay of 0.056%. The excellent reversibility and stability of the novel sulfur cathode can be attributed to the ability of the boron-doped microporous carbon host to both physically confine polysulfides and chemically bind these species on the host surface. Theoretical calculations confirm that boron-doped carbon is capable of significantly stronger interactions with the polysulfide species than undoped carbon, most likely as a result of the lower electronegativity of boron. We believe that this doping strategy can be extended to other metal-air batteries and fuel cells, and that it has promising potential for many different applications.
出处 《Nano Research》 SCIE EI CAS CSCD 2017年第2期426-436,共11页 纳米研究(英文版)
关键词 BORON-DOPING microporous carbon binding energy Li-S batteries boron-doping,microporous carbon,binding energy,Li-S batteries
分类号 O [理学]
  • 相关文献

参考文献4

二级参考文献135

  • 1Bruce, P. G.; Freunberger, S. A.; Hardwick, L. J.; Tarascon, J. M. Li-O2 and Li-S batteries with high energy storage. Nat. Mater. 2012, 11, 19-29.
  • 2Yin, Y. X.; Xin, S.; Guo, Y. G.; Wan, L. J. Lithium-sulfur batteries: Electrochemistry, materials, and prospects. Angew Chem. Int. Ed. 2013, 52, 13186-13200.
  • 3Xu, G. Y.; Ding, B.; Pan, J.; Nie, P.; Shen, L. F.; Zhang, X. G. High performance lithium-sulRtr batteries: Advances and challenges. J. Mater. Chem. A 2014, 2, 12662-12676.
  • 4Wang, J. L.; Yao, Z. D.; Monroe, C. W.; Yang, J.; Nuli, Y. Carbonyl-13-cyclodextrin as a novel binder for sulfur composite cathodes in rechargeable lithium batteries. Adv. Funct. Mater. 2013, 23, 1194--1201.
  • 5Chen, S. Q.; Huang, X. D.; Liu, H.; Sun, B.; Yeoh, W.; Li, K. F.; Zhang, J. Q.; Wang, G. X. 3D hyperbranched hollow carbon nanorod architectures for high-performance lithium- sulfur batteries. Adv. Energy Mater. 2014, 4, DOI: 10.1002/ aenm.201301761.
  • 6Niu, J. J.; Kushima, A.; Li, M. D.; Wang, Z. Q.; Li, W. B.;Wang, C.; Li, J. Scalable synthesis of a sulfur nanosponge cathode for a lithium-sulfur battery with improved cyclability. J. Mater. Chem. A 2014, 2, 19788-19796.
  • 7Ji, X. L.; Lee, K. T.; Nazar, L. F. A highly ordered nanos- tructured carbon-sulphur cathode for lithium-sulphur batteries. Nat. Mater. 2009, 8, 500-506.
  • 8Xu, G.; Ding, B.; Nie, P.; Shen, L.; Dou, H.; Zhang, X. Hierarchically porous carbon encapsulating sulfur as a superior cathode material for high performance lithium- sulfur batteries. ACSAppl. Mater. Interfaces 2013, 6, 194-199.
  • 9Zhao, M. Q.; Zhang, Q.; Huang, J. Q.; Tian, G. L.; Nie, J. Q., Peng, H. J., Wei, F. Unstacked double-layer templated graphene for high-rate lithium-sulphur batteries. Nat. Commun. 2014, 5, 3410.
  • 10Gu, X. X.; Wang, Y. Z.; Lai, C.; Qiu, J. X.; Li, S.; Hou, Y. L.; Martens, W.; Mahmood, N.; Zhang, S. Q. Microporous bamboo biochar for lithium-sulfur batteries. Nano Res. 2015, 8, 129-139.

共引文献51

同被引文献4

引证文献4

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部