期刊文献+

间距对热薄型PMMA滴落行为的影响研究 被引量:3

Study on the influence of distance on the dripping behavior of thermally thin PMMA
在线阅读 下载PDF
导出
摘要 实验研究平行于墙体的热薄型PMMA板的滴落行为,并进行理论分析。使用红外热成像仪记录滴落现象,使用电子秤记录样板质量。结果表明,随着材料与墙体的间距增大,滴落时间、滴落质量和滴落前后燃尽增长距离的数值均是先减小后增大,正面和背面的火焰高度差值逐渐减小,直至背面火焰高度超过正面,距离超过25 mm时间距的影响可以忽略。假设滴落行为与材料的表面净热通量、拉伸黏度以及熔化的PMMA所受到的重力有关。 The dripping behavior of thermally thin PMMA parallel to the wall was experimentally analyzed,and theoretically analyzed.The dripping behavior was recorded by infrared thermal imaging instrument,and the mass was recorded by electronic scale.Results showed that,with the distance between the material and wall increases,the time of dripping,mass of dripping,burnt length difference of before and after dripping all firstly decrease,then increase;the flame height difference of front and back reduces,and the back flame height exceeded the front eventually;the influence of distance over 25 mm can be ignored.It was assumed that the dripping behavior is related to the surface net heat flux,extensional viscosity,and the weight of melt PMMA.
作者 朱辉 朱国庆 陈清泉 高云骥 ZHU Hui ZHU Guo-qing CHEN Qing-quan GAO Yun-ji(Faculty of Safety Engineering, China University of Min ing and Technology, Jiangsu Xuzhou 221116, China)
出处 《消防科学与技术》 CAS 北大核心 2016年第10期1355-1358,共4页 Fire Science and Technology
基金 江苏省自然科学基金项目(BK20131117)
关键词 薄型PMMA板 滴落行为 热通量 热解区域 thin PMMA dripping behavior heat flux pyrolysis zone
  • 相关文献

参考文献2

二级参考文献18

  • 1朱国庆,季经纬,程远平,顾正洪,张宏琨.卷烟制丝车间可燃物燃烧特性实验与火灾模拟[J].中国矿业大学学报,2007,36(3):351-355. 被引量:10
  • 2Yang Kai,Gu Ming yuan,Guo Yi ping,et al.Effects of carbon nanotube functionalization on the mechanical and thermal properties of epoxy composites[J] .Carbon,2009,47:1723-1737.
  • 3Mohamed Abdalla,Derrick Dean,Merlin Theodore,et al.Magneti cally processed carbon nanotube/epoxy nanocomposites:Morphology,thermal,and mechanical properties[J] .Ploymer,2010,51 (7):1614-1620.
  • 4Nanda Gopal Sahoo,Sravendra Rana,Jae Whan Cho,et al.Whan ChoPolymer nanocomposites based on functionalized carbon nanotubes[J] .Prog Polym Sci,2010,35:837-867.
  • 5Ferguson D W,Bryant EWS,Fowler H C.ESD thermoplastic prod uct offers advantages for demanding electronic applications[C] .AN TEC'98,1998:1219-1222.
  • 6Baughman R H,Zakhidov A A,de Heer W A.Carbon nanotubes the route toward applications[J] .Science,2002,297:787-792.
  • 7Aguilar J O,Bautista Quijano J R,Avilés F.Influence of carbon nanotube clustering on the electrical conductivity of polymer composite films[J] .Express Polym Lett,2010,4(5):292-299.
  • 8Oliva-Avilésa AI,Avilésb F,Sosaa V.Electrical and piezoresistive properties of multi walled carbon nanotube/polymer composite films aligned by an electric field[J] .Carbon,2011,49:2989-2997.
  • 9Grossiord Nadia,Loos Joachim,Laake Lucas van,et al.High con ductivity polymer nanocomposites obtained by tailoring the characteristics of carbon nanotube fillers[J] .Adv Funct Mater,2008,18:3226-3234.
  • 10Yuen Siu ming,Ma Chen Chi M,Wu Hsin-ho,et al.Preparation and thermal,electrical,and morphological properties of multiwalled carbon nanotube and epoxy composites[J] .J App Polym Sci,2007,103:1272-1278.

共引文献6

同被引文献5

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部