期刊文献+

带有空穴子模型的石墨烯气凝胶复合相变材料导热系数的分形研究 被引量:2

Fractal model of thermal conductivity of GA-based composite phase change material with hole sub-model
原文传递
导出
摘要 在分形理论的基础上,确定了基于石墨烯气凝胶(graphene aerogel,GA)骨架复合相变材料的分形维数,并基于改进的Sierpinski地毯建立了带有空穴的导热系数预测模型。预测结果表明,对于基于GA骨架的复合相变材料,在所制得的材料孔隙率为0.7的条件下,无论空穴尺寸如何,均可将导热系数从相变材料本身的0.250 W/(m·K)提升至10.900 W/(m·K),增长幅度达40倍以上。结果显示,复合相变材料的导热系数随着孔隙率的减小而增加,且在低孔隙率下,导热系数随空穴尺寸的减小而增加。 The fractal dimension of graphene aerogel(GA)-based composite phase-change material (CPCM) was determined based on fractal theory. The model of effective thermal conductivity with hole sub-model was built based on improved Sierpinski carpet. The calculated results show that when the porosity of the synthetic GA is 0.7, the thermal conductivity of CPCM is enhanced by 40 times from 0. 250 W/(m · K) to 10. 900 W/(m · K) regardless of the hole size. It is concluded that the thermal conductivity increases with the decrease of the porosity..And when the porosity is low, the thermal conductivity increases with the decrease of hole size.
作者 田帅奇 方昕 俞自涛 TIAN Shuai-qi FANG Xin YU Zi-tao(Institute of Thermal Science and Power Systems, Zhejiang University, Hangzhou 310027, China Key Laboratory of Refrigeration and Cryogenic Technology of Zhejiang Province, Hangzhou 310027, China)
出处 《热科学与技术》 CAS CSCD 北大核心 2016年第6期438-443,共6页 Journal of Thermal Science and Technology
基金 浙江省自然科学基金资助项目(Y16E060004)
关键词 石墨烯气凝胶 有效导热系数 分形模型 空穴子模型 graphene aerogel effective heat conductivity fractal model cavity submodel
  • 相关文献

参考文献4

二级参考文献69

  • 1张新铭,彭鹏,王金灿.基于分形理论的石墨泡沫新材料导热系数[J].重庆大学学报(自然科学版),2004,27(9):109-111. 被引量:7
  • 2张海峰,葛新石,叶宏.预测复合材料导热系数的热阻网络法[J].功能材料,2005,36(5):757-759. 被引量:17
  • 3俞自涛,胡亚才,田甜,范利武.木材横纹有效导热系数的分形模型[J].浙江大学学报(工学版),2007,41(2):351-355. 被引量:16
  • 4Pitchumani R, Yao S C. [J]. Journal of Heat Transfer, 1991,113 : 788-796.
  • 5Sabau A S, Tao Y X, Liu G, et al. [J].Proc of National Heat Transfer Conference, 1997,11 : 121-128.
  • 6Zhao C Y,Lu W,Tian Y.Heat transfer enhancement for ther-mal energy storage using metal foams embedded within phase change materials(PCMs)[J].Sol Energy,2010,84(8):1402-1412.
  • 7Hong S T,Herling D R.Open-cell aluminum foams filled with phase change materials as compact heat sinks[J].Scripta mater,2006,55(10):887-890.
  • 8Hong S T,Herling D R.Effects of surface area density of alu-minum foams on thermal conductivity of aluminum foam-phase change material composites[J].Adv Eng Mater,2007,9(7):554-557.
  • 9Karaipekli A,Sari A,Kaygusuz K.Thermal characteristics of paraffin/expanded perlite composite for latent heat thermal ener-gy storage[J].Energ Source Part A,2009,31(10):814-823.
  • 10Lafdi K,Mesalhy O,Shaikh S.Experimental study on the in-fluence of foam porosity and pore size on the melting of phase change materials[J].J Appl Phys,2007:102.

共引文献46

同被引文献20

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部