摘要
简要介绍了合成孔径雷达干涉测量技术、差分干涉雷达测量技术,并对干涉测量精度进行了简单讨论.以西藏玛尼地区为例,通过三通差分干涉处理,获取了玛尼地震同震形变场.结果表明:形变场长200 km、宽115 km.干涉条纹以北东东向发震断层——玛尔盖茶卡断层为中心分布,且基本与发震断层平行;通过对干涉形变图进行分析,发震断层可分为3段,其中西段长约23 km,中段长约60 km,东段长约26 km,整个发震断层共长110 km;震中附近最大隆起斜距向位移量为162.4 cm,断层西侧最大沉降斜距向位移量为103.6 cm,震中最大地面水平位错为7.96 m.
Interferometry Synthetic Aperture Radar (InSAR) is a kind of new earth observation technique and great development has been made in the recent ten years. In the paper, InSAR and Differential Interferometric Synthetic Aperture Radar (D-InSAR) are generally introduced; then the factors affecting the data accuracy are primarily discussed. Mani earthquake was selected as an example to obtain the coseismic deformation field with the three-pass differential interferometric processing method. The results show that the coseismic deformation field is about 200 km in length and 115 km in width. The interferometric fringes spread in the area with the NEE-trending seismogenic fault the Margaichaka fault as the center and they are primarily parallel to the fault. Based on the analysis to the interferogram, the seismogenic fault can be divided into three segments. The whole fault is about 110 km and the length of each segment from the west to the east is about 23 km, 60 km and 26 km. The maximum uplifting displacement in the side-looking direction near the seismic center is about 162.4 cm, the maximum subsiding displacement in the side-looking direction in the western part of the fault is about 103.6 cm, and the maximum horizontal surface dislocation near the seismic center is about 7.96 m.
出处
《地震学报》
CSCD
北大核心
2002年第4期413-420,共8页
Acta Seismologica Sinica
基金
国家自然科学基金(49802027)
国家重点基础研究规划项目(G1998040703)
地震科学联合基金(102096)共同资助.
