摘要
提出了一种基于棋盘格模板的单目摄像机标定方法,该方法首先使用高精度CCD摄像机对摆放在二维手动导轨平台上,沿Z坐标轴多次改变固定值的棋盘格标定模板进行拍摄,并提取棋盘格角点的亚像素坐标.再结合DLT标定方法求得摄像机所有参数,最后对任意位置的棋盘格角点进行三维重建来测量标定精度,重建得到的X坐标和Y坐标平均误差均为±0.02 mm.实验结果表明该方法能够快速、有效地获取高精度的摄像机参数,可以满足三维重建及其他视觉检测场合使用要求.
In this paper, a monocular camera calibration method based on checkerboard template is presented.This method is using a high-precision CCD camera to take pictures of checkerboard calibra-tion template which is placed on a two-dimensional platform with hand-operated rails.Its fixed values vary along the Z axis, and so the subpixel coordinates of checkerboard corner points yield.Then all the camera parameters can be obtained by adopting DLT calibration method, and finally the arbitrary checkerboard corner points will be reconstructed to test the accuracy of calibration by estimating in 3 D spatial coordinate.The average error of horizontal and vertical coordinates are both ＆#177;0.02 mm.Ex-perimental data show that by using this method high-precision camera parameters can be obtained quick-ly and efficiently, which meets the requirements of three-dimensional reconstruction and other visual in-spection occasions.
出处
《广东工业大学学报》
CAS
2015年第3期79-84,共6页
Journal of Guangdong University of Technology
基金
国家自然科学基金资助项目(11072063)
关键词
棋盘格
单目摄像机
标定
三维重建
高精度
checkerboard
monocular camera
calibration
3 D reconstruction
high precision
