期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

不同牙体修复材料与Ⅱ类洞龈壁适合性的显微CT观察 被引量：8

Micro-CT observations of the adaptation at gingival wall in Class Ⅱ restorations with different dental restorative materials
暂未订购
导出
摘要 目的:使用显微CT观察不同牙体修复材料用于Ⅱ类洞充填修复时材料与龈壁的适合性。方法:选择人离体前磨牙18颗,制备邻牙合面Ⅱ类洞,随机分为6组进行分层充填。使用6种材料作为龈壁层材料,包括4种注射式充填材料:Beautifil Flow Plus F00(F00)、Beautifil Flow F10(F10)、Filtek Z350 Flowable(Z350F)和FujiⅡLC CAPSULE(Fuji),以及2种膏体状填压式充填材料:BeautifilⅡ(BF)和Filtek Z350(Z350)。将充填修复后离体牙进行显微CT扫描和三维重建,分析龈壁层充填体-牙齿界面孔隙体积和分布。孔隙体积采用Jonckheere-Terpstra非参检验方法进行统计分析。结果:龈壁层充填体-牙齿界面孔隙体积(mm3)由小到大依次为:Z350F(0.000 15)、F10(0.000 39)、F00(0.012)、Fuji(0.070)、Z350(0.16)和BF(0.20),Z350F/F10组与Fuji/Z350/BF组差异具有统计学意义(P<0.05)。孔隙分布结果显示,绝大多数孔隙位于窝洞的点线角。结论:龈壁层充填体-牙齿界面孔隙主要位于窝洞点线角,高流动注射式充填材料可以有效减少界面孔隙的产生。 Objective： To evaluate the adaptation of different materials for gingival layer in Class Ⅱrestorations using Micro-CT.Methods：Eighteen extracted human premolars were selected, and ClassⅡcavities were prepared.The teeth were randomly divided into six groups and restored using layering tech-nique.Six materials were used for gingival layer, including four injectable materials：Beautifil Flow Plus F00 （F00）, Beautifil Flow F10 （F10）, Filtek Z350 Flowable （Z350F）, FujiⅡLC CAPSULE （Fuji）, and two packable materials： BeautifilⅡ （BF）, Filtek Z350 （Z350）.The restored teeth were scanned with micro-CT and the images were 3D reconstructed to evaluate the volumes and the distribution of the voids on the restoration-tooth interface of the gingival layer.The volume of the voids were statistically analyzed using nonparametric Jonckheere-Terpstra tests.Results： The volumes （ mm3 ） of the voids on the restoration-tooth interface were： Z350F （0.000 15）, F10 （0.000 39）, F00 （0.012）, Fuji （0.070）, Z350 （0.16） and BF （0.20）.There were significant differences between Z350F/F10 and Fuji/Z350/BF （P〈0.05）.Most of the voids were found on the point-line angles of the cavities.Con-clusion：The voids on the restoration-tooth interface were mainly on the point-line angles of the cavities. Injectable materials with high flowablility could reduce the restoration-tooth interface voids significantly when used for the gingival layer in ClassⅡrestorations.
作者 聂杰 王晓燕 高学军
机构地区 北京大学口腔医学院.口腔医院牙体牙髓科
出处 《北京大学学报（医学版）》 CAS CSCD 北大核心 2015年第2期317-320,共4页 Journal of Peking University:Health Sciences
基金 北京市科学技术委员会科技计划项目(Z141100000514016)资助~~
关键词 牙科材料 牙修复体 牙洞 龈壁层 X射线显微断层成像 Dental materials Dental prosthesis Dental cavity Gingival layer X-ray microto-mography
分类号 R783.3 [医药卫生—口腔医学]
  • 相关文献

参考文献16

  • 1Lokhande NA, Padmai AS, Rathore VP, et al. Effectiveness of flowable resin composite in reducing microleakage-an in vitro study [J]. J Int Oral Health, 2014, 6(3) : 111 -114.
  • 2McCabe JF, Ogden AR. The relationship between porosity, com- pressive fatigue limit and wear in composite resin restorative mate- rials [J]. Dent Mater, 1987, 3(1): 9-12.
  • 3Purk JH, Dusevich V, Glaros A, et al. Adhesive analysis of voids in Class I1 composite resin restorations at the axial and gingival cavity walls restored under in vivo versus in vitro conditions [J]. Dent Mater, 2007, 23(7) : 87l -877.
  • 4Andersson-Wenckert IE, van Dijken JW, Kieri C. Durabi[ity of extensive Class 11 open-sandwich restorations with a resin-modifiedglass ionomer cement after 6 years [ J ]. Am J Dent, 2004, 17(1) : 43 -50.
  • 5Lindberg A, van Dijken JW, Lindberg M. 3-year evaluation of a new open sandwich technique in Class 11 cavities [ J ]. Am J Dent, 2003, 16(1): 33-36.
  • 6Ehrnford L, Derand T. Cervical gap formation in class II compo- site resin restorations [J]. Swed Dent J, 1984, 8( 1 ) : 15 -19.
  • 7Yahagi C, Takagaki T, Sadr A, et al. Effect of lining with a flowable composite on internal adaptation of direct composite resto- rations using all-in-one adhesive systems [ J ]. Dent Mater J, 2012, 31(3) : 481 -488.
  • 8Elbishari H, Silikas N, Satterthwaite J. Filler size of resin-com- posites, percentage of voids and fracture toughness : is there a cor- relation? [J]. Dent Mater J, 2012, 31(4) : 523 -527.
  • 9赵信义,张武,Sean Lee,Clyde Roggenkamp,陆梅,李一鸣.两种充填方式对不同光固化复合树脂充填体内孔隙的影响[J].中华口腔医学杂志,2010,45(1):39-43. 被引量：7
  • 10Ironside JG, Makinson OF. Resin restorations: causes of porosities [ J]. Quintessence Int, 1993, 24 (12) : 867 - 873.

二级参考文献11

  • 1Ogden AR. Porosity in composite resins: an Achilles' heel? J Dent, 1985, 13(4) : 331-340.
  • 2McCabe JF, Ogden AR. The relationship between porosity, compressive fatigue limit and wear in composite resin restorative materials. Dent Mater, 1987, 3(1) : 9-12.
  • 3O'Brien WJ, Yee J Jr. Microstrueture of posterior restoration of composite resin after clinical wear. Oper Dent, 1980, 5 (3): 90 -94.
  • 4Tyas M J, Jones DW, Rizkalla AS. The evaluation of resin composite consistency. Dent Mater, 1998, 14(6) : 424-428.
  • 5Hansen EK, Asrnussen E. Efficacy of dentin-bonding agents in relation to application technique. Acta Odontol Scand, 1989, 47(2) : 117-120.
  • 6Huysmans MC, van der Varst PG, Lautenschlager EP, et al. The influence of simulated clinical handling on the flexural and compressive strength of posterior composite restorative materials.Dent Mater, 1996, 12(2): 116-120.
  • 7Opdam N J, Roeters JJ, Joosten M, et al. Porosities and voids in Class I restorations placed by six operators using a packable or syringable composite. Dent Mater, 2002, 18( 1 ) : 58-63.
  • 8Van Beetzen M, Li J, Nieander I, et al. Microhardness and porosity of Class 2 light-cured composite restorations cured with a transparent cone attached to the light-curing wand. Oper Dent, 1993, 18(3): 103-109.
  • 9Al-Sharaa KA, Watts D. Stickiness prior to setting of some light cured resin-composites. Dent Mater, 2003, 19(3) : 182-187.
  • 10Fano V, Ortalli I, Pozela K. Porosity in composite resins. Biomaterials, 1995, 16(17) : 1291-1295.

共引文献6

同被引文献51

  • 1冯应宏,魏明波,陈建钢.Prime & BondNT粘结剂对银汞合金充填微渗漏及密合度的影响[J].临床口腔医学杂志,2005,21(1):30-32. 被引量：15
  • 2李冰玉,杜启涛,许颖.龈壁设计对应用嵌体修复后牙体组织应力改变的影响[J].中国组织工程研究与临床康复,2007,11(2):216-218. 被引量：6
  • 3于玲,王晓燕,田福聪,高学军.一步法自酸蚀粘接剂微拉伸粘接强度的研究[J].中华口腔医学杂志,2007,42(4):240-241. 被引量：22
  • 4Wendt SL, Mclnnes PM, Dickinson GL.The effect of ther- mocycling in microleakage analysis[J]. Dent Mater, 1992, 8 (3): 181-183.
  • 5Ferracane JL, Stansbury JW, Burke FJ. Self-adhesive resin cements: chemistry, properties and clinical considerations[J]. J Oral Rehabil, 2011, 38(4): 295-314. DOI:10.1111/j. 1365-2842.2010.02148.x.
  • 6Hanabusa M, Mine A, Kuboki T, et al. TEM interfacial characterization of an experimental self-adhesive filling material bonded to enamel/dentin[J]. Dent Mater, 2011, 27(8): 818-824. DOI: 10.1016/j.dental.2011.0d.007.
  • 7Blunck U, Zaslansky P. Enamel margin integrity of Class I one-bottle all-in-one adhesives-based restorations[J]. J Adhes Dent, 2011, 13(1): 23-29. DOI:10.3290/j.jad.a18445.
  • 8Poitevin A, De Munck J, Van Ende A, et al. Bonding effectiveness of self-adhesive composites to dentin and enamel [J]. Dent Mater, 2013, 29(2): 221-230. DOI:10.1016/j.dental. 2012.10.001.
  • 9E1-Askary FS, Van Noort R. Effect of air-drying pressure and distance on microtensile bond strength of a self-etching adhesive[J]. J Adhes Dent, 2011, 13(2): 147-153. DOI:10.3290/j.jad.a 18782.
  • 10Van Meerbeek B, De Munck J, Yoshida Y, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges[J]. Oper Dent, 2003, 28(3): 215-235.

引证文献8

二级引证文献31

北京大学学报（医学版）
2015年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部