摘要
通过调节微弧氧化电解液中Na2Si O3和KOH浓度的配比,制备出厚达200μm以上的陶瓷氧化层,并对膜层进行厚度测量、SEM分析和硬度测试。结果表明：当Na2Si O3的质量浓度为5.5~6.0 g/L、KOH的质量浓度为1 g/L时,膜层厚可达260μm;陶瓷膜层颗粒和放电气孔尺寸均较小,膜层致密性良好;同时硬度可达1 500HV以上。
The aluminum ceramic coating with 200 μm thickness was prepared by adjusting the concentration ratio of Na2SiO3 and KOH in the micro-arc oxidation electrolyte, and the thickness of ceramic coating, the microstructure and hardness of the ceramic coating were tested. The results show that when the concentration of Na2SiO3 is from 5.5 to 6.0 g/L and KOH concentration is 1 g/L, the thickness of the prepared ceramic coating is 260 μm. And the results of scanning electron microscopy （SEM） show that the particles size of ceramic coating and the pore size of discharge are both small, and the compactness of ceramic coating is good, at the same time, its hardness can reach more than 1＇ 500HV.
出处
《兵器材料科学与工程》
CAS
CSCD
北大核心
2015年第2期77-80,共4页
Ordnance Material Science and Engineering
基金
烟台市重大科技发展计划项目(2013JH020)
关键词
微弧氧化
铝合金
电解液
耐烧蚀
micro-arc oxidation
aluminum alloy
electrolyte
ablation resistance
