期刊文献+

Dynamic flow resistivity based model for sound absorption of multi-layer sintered fibrous metals 被引量:4

Dynamic flow resistivity based model for sound absorption of multi-layer sintered fibrous metals
原文传递
导出
摘要 The sound absorbing performance of the sintered fibrous metallic materials is investigated by employing a dynamic flow resistivity based model,in which the porous material is modeled as randomly distributed parallel fibers specified by two basic physical parameters:fiber diameter and porosity.A self-consistent Brinkman approach is applied to the calculation of the dynamic resistivity of flow perpendicular to the cylindrical fibers.Based on the solved flow resistivity,the sound absorption of single layer fibrous material can be obtained by adopting the available empirical equations.Moreover,the recursion formulas of surface impedance are applied to the calculation of the sound absorption coefficient of multi-layer fibrous materials.Experimental measurements are conducted to validate the proposed model,with good agreement achieved between model predictions and tested data.Numerical calculations with the proposed model are subsequently performed to quantify the influences of fiber diameter,porosity and backed air gap on sound absorption of uniform(single-layer)fibrous materials.Results show that the sound absorption increases with porosity at higher frequencies but decreases with porosity at lower frequencies.The sound absorption also decreases with fiber diameter at higher frequencies but increases at lower frequencies.The sound absorption resonance is shifted to lower frequencies with air gap.For multi-layer fibrous materials,gradient distributions of both fiber diameter and porosity are introduced and their effects on sound absorption are assessed.It is found that increasing the porosity and fiber diameter variation improves sound absorption in the low frequency range.The model provides the possibility to tailor the sound absorption capability of the sintered fibrous materials by optimizing the gradient distributions of key physical parameters.
出处 《Science China(Technological Sciences)》 SCIE EI CAS 2014年第11期2096-2105,共10页 中国科学(技术科学英文版)
基金 supported by the National Basic Research Program of China("973"Project)(Grant No.2011CB610300) the National Natural Science Foundation of China(Grant Nos.11102148,11321062 and 51134003) the Fundamental Research Funds for Central Universities of China(Grant No.xjj2011005)
关键词 sound absorption sintered fibrous material dynamic flow resistivity 纤维直径 吸声系数 基于模型 金属材料 烧结 流阻 纤维材料 数值计算
  • 相关文献

参考文献3

二级参考文献20

  • 1李海涛,朱锡,石勇,董鹏.多孔性吸声材料的研究进展[J].材料科学与工程学报,2004,22(6):934-938. 被引量:91
  • 2卢天健,何德坪,陈常青,赵长颖,方岱宁,王晓林.超轻多孔金属材料的多功能特性及应用[J].力学进展,2006,36(4):517-535. 被引量:260
  • 3张钱城,卢天健,何思渊,何德坪.闭孔泡沫铝的孔结构控制[J].西安交通大学学报,2007,41(3):255-270. 被引量:34
  • 4卢天健,Iain D. J. Dupère,Ann P. Dowling.多孔泡沫材料的声吸收特性[J].西安交通大学学报,2007,41(7):861-861. 被引量:18
  • 5JING X D, WANG X Y, SUN X F. Broadband acoustic liner based on the mechanism of multiple cavity resonance[J]. AIAA Journal, 2007,45(10) : 2 429-2 437.
  • 6ALLARD J.F. Propagation of sound in porous media, modeling sound absorbing materials[M]. New York:Elevier Applied Science, 1993.
  • 7Wang X L, Lu T J. Optimised acoustic properties of cellular solids [J]. Journal of the Acoustical Society of America, 1999, 106(2): 756-765.
  • 8Lu T J, Hess A, Ashby M F. Sound absorption in metallic foams [J]. Journal of Applied Physics, 1999, 85(11) : 7528-7539.
  • 9Dupere I D J, Dowling A P, Lu T J. The absorption of sound in cellular foams [C]//Proceedings of the ASME Noise Control and Acoustics Division 2004. New York: ASME, 2004: 123-132.
  • 10Dupere I D J, Lu T J, DoMing A. Acoustic properties [M] // Colombo P, Scheffler M. Cellular Ceramics: Structure, Manufacturing, Properties and Applications. Weinheim, Germany: Wiley-VCH, 2005: 381- 399.

共引文献56

同被引文献30

引证文献4

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部