期刊文献+

内置螺旋弹簧换热管的换热研究 被引量:4

Experimental study of heat exchange of built-in spiral spring heat exchange tubes.
在线阅读 下载PDF
导出
摘要 采用自行设计的套管传热实验装置及流程 ,进行了内置螺旋弹簧换热管的换热性能实验研究。实验研究结果表明 ,换热管内置螺旋弹簧时总的传热系数K值比无弹簧时要大 ,说明内置弹簧可提高换热效果 ,且弹簧振动时 ,传热系数达到最大 ;在相同当量流量情况下 ,换热管内置弹簧可明显增加管内阻力降 ,且阻力降受弹簧刚度和长度影响 ,但弹簧振动时阻力降趋于一致 ;弹簧与换热管内壁的摩擦可缓解管内壁结垢 。 The heat exchange performance of the built-in spiral spring heat exchange tube is investigated in the lab by using the self-designed experimental device and flow. The result of the experiment shows that the total heat transfer coefficient K is increased when the spiral spring is fixed in the heat exchange tubes. And this means that the built-in spring is helpful to better the heat exchange effect. When the spring vibrates, the heat exchange coefficient reaches to the maximal value. Under the condition of the same equivalent flow, the built-in spring of the heat exchange tube can lead to an evident increase of the resistance drop in the tube. The resistance drop is influenced by the rigidity and length of the spring, but they will be similar to each other when the spring vibrates.The friction between the spring and the inner wall of the heat exchange tubes may eliminate scale in the tube inner wall, therefore it is helpful to improve the service life of the heat exchanger.
作者 张锁龙 张琳
出处 《石油机械》 北大核心 2002年第7期5-7,75,共3页 China Petroleum Machinery
基金 江苏石油化工学院科技基金赞助项目 项目编号 5 2 110 7
关键词 内置螺旋弹簧换热管 换热器 换热性能 实验研究 heat exchange tube spring heat exchange performance experimental study
  • 相关文献

参考文献4

二级参考文献24

  • 1张同达,刘素云,钱颂文,岑汉钊,陈志勤,周茂德.折流杆螺纹槽管应用于沸腾换热的试验研究[J].石油化工设备,1995,24(4):3-7. 被引量:3
  • 2刘素云,纪桂芬,孙翰书.板条式折流杆螺旋槽管再沸器的开发及应用[J].石油化工设备技术,1995,16(3):21-24. 被引量:6
  • 3张莉伯.新型高效换热技术简介[J].设备管理与维修,1996(2):19-21. 被引量:8
  • 4孙元进.扰流子强化换热器传热的研究与应用[M].抚顺:抚顺石油学院,1989..
  • 5华贲.强化传热技术在我国石化工业中的应用[J].石油炼制,1988,(7):21-25.
  • 6 Taborek J,  Aoki  T, Ritter R B, et al. Fouling: the major unresolved problem in heat transfer [J]. Chem. Eng.Progr., 1972, 68(2): 59-67.
  • 7 Epstein  N.Thinking  about  heat  transfer fouling: 15×5matrix [J]. Heat Transfer Eng., 1983, 4(1): 43-56.
  • 8 Somerscales  E  F C,  Knudsen J  G (eds).  Fouling  of  heattransfer, Proceedings of a conference [C]. New York: Hemisphere PublishingCorporation, 1981.
  • 9 Kern  D  Q, Seaton  R  E. A theoretical analysis of thermalsurface fouling [J]. British Chemical Engineering, 1959, 4(5): 258-262.
  • 10 Garrett-Price B A. Fouling in heat exchangers [M]. New Jersey: NoyesPublications, 1985.

共引文献51

同被引文献25

引证文献4

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部