期刊文献+

催化湿式氧化法在苯酚废水预处理中的应用研究 被引量:23

Study of catalytic wet air oxidation to be used in the pretreatment of phenol wastewater
在线阅读 下载PDF
导出
摘要 与湿式空气氧化相比 ,催化湿式氧化可以在温和条件下达到较好的废水处理效果。考察了CuO/ η Al2 O3 和活性炭两种催化剂处理苯酚废水的催化效果 ,结果表明在温和条件下可以达到较高COD去除率 :在 14 0℃下 ,催化湿式氧化 1h ,CODCr去除率分别达到 93.2 %和 88.4 %。在 16 0℃下 ,催化湿式氧化 1h ,CODCr去除率分别达到 93.4 %和 90 .1%。在 14 0℃下 ,苯酚废水经过湿式空气氧化 1h后 ,BOD5/CODCr仅仅达到 0 .0 8,不适合后续生物法处理 ;使用活性炭催化剂 ,BOD5/CODCr达到了 0 .18,而使用CuO/ η -Al2 O3 催化剂 ,BOD5/CODCr达到了0 .30 ,因此 ,用CuO/ η -Al2 O3 催化剂处理苯酚废水可以在较低温度下达到预处理效果。 Compared with wet air oxidation,catalytic wet air oxidation has better effect on treating wastewater under mild conditions. Two kinds of catalyst are prepared:CuO/ η Al 2O 3 and AC catalysts. Firstly,the effect of these catalysts on catalytic wet air oxidation to be used in phenol wastewater treatment under different conditions is evaluated. The results show that raising pH value in the solution has disadvantageous effect on the removal of COD Cr from phenol wastewater. As to CuO/ η Al 2O 3 and AC catalysts, the COD Cr removal rate is higher under mild conditions:after 1 h reaction time, at 140 ℃,the COD Cr removal rate reaches 93.2% and 88.4% respectively;and at 160 ℃,the COD Cr removal rate reaches 93.4% and 90.1% respectively. But at 140 ℃,after the phenol wastewater is treated by wet air oxidation for 1 h, the BOD 5/COD Cr reaches only 0.08. The effect of different biodegradability is resulted from using different catalysts. BOD 5/COD Cr reaches 0.30 by using catalyst CuO/ η Al 2O 3,while BOD 5/COD Cr reaches 0.18 by using catalyst activated carbon as catalyst. Therefore using CuO/ η Al 2O 3 as catalyst to treat phenol wastewater can get the pretreatment effect under lower temperature.
出处 《工业水处理》 CAS CSCD 2002年第6期19-22,共4页 Industrial Water Treatment
关键词 苯酚废水 催化湿式氧化 含酚废水 预处理 生物降解性 废水处理 catalytic wet air oxidation phenol wastewater pretreatment biodegradability
  • 相关文献

参考文献3

二级参考文献4

共引文献62

同被引文献288

引证文献23

二级引证文献163

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部