摘要
分析了高炉喷吹粉煤颗粒流造成高炉风口壁面底侧的磨损情况 ,建立了预测高炉风口磨损量的数学模型 :δm=ρpρcHsHce(D -dp)dp2πD2 Cp| r=RvmE′cosθ.研究结果表明 :高炉风口磨损主要与粉煤喷吹量、风口材质、风口几何尺寸、风口半收缩角以及热风速度和粉煤颗粒粒径等因素有关 ;当粉煤喷吹量相同时 ,减少粉煤颗粒在高炉风口壁面附近的浓度 ,改变风口壁面材质和使用较小粒径的粉煤 ,可减少高炉风口壁面磨损 .由该数学模型算出的某钢铁厂高炉风口平均寿命与其实际平均寿命基本吻合 。
More than 80 percent of tuyeres are damaged by pulverized coal injection. At the downside of blast furnace tuyere, the erosion due to single pulverized coal injection is analyzed and studied. Based on the case of tuyere, a mathematical model is established to predict the service life of tuyere that can be described as δ m=ρ pρ cH sH ce(D-d)2πD2C p| r=Rv mE′cosθ . The calculated results of the model show that the erosion of blast furnace tuyere has a very close relation with injection rate of pulverized coal, characteristics of tuyere materials, geometrical shape of the tuyere, blast velocity, half tuyere angle and diameter of pulverized coal particle, etc. Finally,some measures to enhance service life of BF tuyere are given in the case with the same injection rate of pulverized coal such as reducing the consistence of pulverized coal particle near the surface of BF tuyere, changing the material of the surface of BF tuyere and using less diameter of pulverized coal particle. Average service life of 272 days predicted by the model is coincided with actual service life of tuyere that is 260 days in an Iron & Steel Group Company of China. The reliability and the generality of the model is well tested.
出处
《中南工业大学学报》
CSCD
北大核心
2001年第4期382-385,共4页
Journal of Central South University of Technology(Natural Science)
关键词
高炉
粉煤喷吹
风口
磨损
blast furnace
pulverized coal injection
tuyere
erosion
