期刊文献+

电弧喷涂锌合金液滴飞行过程数值分析 被引量:6

Numerical analysis of arc spray Zn-Al droplets in flight
在线阅读 下载PDF
导出
摘要 运用流体力学、传热学以及相变等理论 ,建立数学模型描述金属液滴与气流的相互作用 ,计算了金属液滴的飞行速度和温度衰减过程。结果表明 :金属液滴飞行速度、温度以及凝固程度是金属液滴直径、飞行距离的函数 ;金属射流中固态金属颗粒比例是金属射流中金属液滴质量分布的函数 ;飞行距离 6 0 0mm以内 ,固态、半固态金属颗粒所占比例不超过 2 %。 An integral model for arc spray Zn Al droplets in flight was developed using established theoretical principles of fluid mechanics, heat transmission and phase transformation. Mathematical models describe the interconnected processes of droplet gas interactions in flight. The calculation result of Zn Al droplets velocity and temperature shows that droplets velocity and temperature are function of flight distance and droplets diameter. Percentage of solid droplets in metal spray is a function of droplets size distribution. In flight distance(<600?mm), depending on size and cooling rate, the droplets in metal spray are completely liquid, partially solidified, or completely solidified, the percentage of partially solidified, or completely solidified in metal spray do not exceed 2%.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2001年第6期1083-1088,共6页 The Chinese Journal of Nonferrous Metals
关键词 电弧喷涂 速度 温度 锌合金 数值分析 arc spray velocity temperature numerical analysis
  • 相关文献

参考文献3

二级参考文献11

  • 1陈隆庆,沈宁福,孙国雄.Al-Fe-V-Si快速凝固热强铝合金中“块状相”的产生条件[J].金属学报,1995,31(7). 被引量:5
  • 2傅晓伟 张济山 等.-[J].北京科技大学学报,1998,16.
  • 3傅晓伟,北京科技大学学报,1998年,16卷
  • 4Fu X W,The PRICM 3 on Advanced Materials and Processing,1998年,12卷,1713页
  • 5Fritsching U,Steel Res,1994年,65卷,7期,273页
  • 6Jangin G,International Conference on Advanced Manufacturing Technology’99,1999年
  • 7Cheng H,Metal Industry(China),1996年,30卷,3期,84页
  • 8陈国桢,铸件缺陷和对策手册,1996年,177页
  • 9方昆凡,机械工程材料实用手册,1995年,1044页
  • 10美国金属学会,金属手册(第9版),1994年,906页

共引文献35

同被引文献86

  • 1Shao Beiling,Liu Ansheng,Wang Xiaohua,Li Yonghong,Zou Linying,Wang Jing,Zhang Jianguo,Shi Changyong,Zhou Yiru(General Research institute For Nonferrous Metals,Beijing 100088).MICROSTRUCTURE OF INTERFACE BETWEEN HVOF SPRAYED WC-Co COATING AND SPRING STEEL SUBSTRATE[J].中国有色金属学会会刊:英文版,1996,6(4):76-81. 被引量:3
  • 2朱子新,刘燕,徐滨士,马世宁.高速电弧喷涂雾化熔滴传热过程数值分析 Ⅱ.工艺参数对熔滴传热过程的影响[J].焊接学报,2005,26(2):5-8. 被引量:2
  • 3田保红,徐滨士,马世宁,刘世参,梁秀兵.高速电弧喷涂3Cr13钢雾化粒子温度和飞行速度数值模拟[J].机械工程学报,2005,41(7):169-173. 被引量:4
  • 4Stewart S,Ahmed R.Rolling Contact Fatigue of Surface Coatings-a Review.Wear,2002,253(11-12):1132~1144
  • 5Vaidya A.Process Maps for Thermal Spray:a Fundamental Approach to Process-Property Relationships:[Ph.D.Dissertation].New York:State University of New York at Stony Brook,2004
  • 6Edrisy A,Perry T,Alpas A T.Wear Mechanism Maps for Thermal Spray Steel coatings.Metallurgical and Materials Transactions A,2005,36A(10):2737~2750
  • 7Cirolino S,Harding J H,Jacucci G.Computer Simulation of Plasma-sprayed Coatings I.Coating Deposition Model.Surface and Coatings Technology,1991,48(2):137~145
  • 8Zhang T,Bao Y,Gawne D T.Process Model of Plasma Enamelling.Journal of the European Ceramic Society,2003,23(7):1019~1026
  • 9Zagorski A V,Stadelmaier F.Full-scale Modelling of a Thermal Spray Process.Surface & Coatings Technology,2001,146-147(9-10):162~167
  • 10Vardelle M,Vardelle A,Leger A C,et al.Dynamics of Splat Formation and Solidification in Thermal Spraying Processes.The 7th National Thermal Spray Cerference,Boston,USA,1994

引证文献6

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部