摘要
单排焊钉推出试验与多排焊钉推出试验得到的单钉承载力有一定的差别,为了明确焊钉排数对多排焊钉的抗剪承载力的影响,进行了1组单排焊钉基本力学试验和4组不同排数的多排焊钉力学性能试验.试验结果表明,焊钉排数对焊钉的抗剪承载力有影响,换算得到的单个焊钉承载力随排数的增加而降低,焊钉排数的影响随排数的增加而趋于稳定,其影响值在15%以内.结合试验结果,给出了焊钉排数对其抗剪承载力影响的表达式.此外,根据多排焊钉的荷载滑移曲线,给出了多排焊钉的荷载滑移关系表达式,与试验结果比较表明,所给表达式的结果与试验结果吻合较好.
The shear bearing capacity of single stud obtained from single-row stud push-out test and that from multi-row stud push-out test are different to some degree.In order to clarify the effect of the stud row numbers on the ultimate strength of the stud,one single stud push-out test and four multi-row stud push-out tests with different rows were carried out.The test results show that the number of stud rows affects the stud shear bearing capacity,and the average capacity of single stud connector decreases by increasing the number of stud rows,while the influence of the number of stud rows tends to be stable with the increasing of the number of row,also the influence value is within 15％.Combined with the push-out test,the expression of the number of stud row affecting the shear bearing capacity of stud is given.In addition,based on the load-slip curves of multi-row stud,the expression of the load-slip relation of multi-row stud is proposed.Compared to testing results,the new expression has a better match with the experimental values.
出处
《同济大学学报（自然科学版）》
EI
CAS
CSCD
北大核心
2014年第7期1011-1016,共6页
Journal of Tongji University:Natural Science
基金
国家"九七三"重点基础研究发展计划(2013CB036303)
关键词
剪力钉
推出试验
多排
受力特点
抗剪强度
headed stud shear connector
push-out test
multi-row
mechanical behavior
ultimate shear strength
