摘要
通过工艺对比,采用好氧曝气—Fenton试剂氧化—好氧曝气—活性炭吸附工艺对涂料添加剂生产废水的处理进行了研究。当原水CODCr为1 034 mg/L时,通过本处理技术,能将CODCr处理至70 mg/L以下,达到中水回用的目的。
By comparison with other technology, the process of aeration -- Fenton -- aeration -- activated carbon absorption was effective on the wastewater discharged from coating additive production. When the raw water CODcr was 1 034 rag/L, the treated water CODcr could be reduced to below 70 mg/L through above technology.
出处
《净水技术》
CAS
2014年第A01期64-67,共4页
Water Purification Technology
关键词
涂料添加剂生产废水
好氧曝气
FENTON氧化
活性炭吸附
wastewater from coating additive production
aeration
Fenton oxidation
activated carbon adsorption
