摘要
基于Deform建立了硬质合金刀具切削TC4钛合金时的仿真模型,通过切削试验对仿真模型的主切削力进行了验证,并利用该模型对刀具角度与切削力之间的关系进行了研究。研究结果表明:仿真所得到的主切削力与试验测得主切削力相差小于10%,仿真模型可靠性较高,可用于TC4钛合金切削力的研究。通过仿真研究得到,在一定范围内,随着刀具前角的增大,主切削力和进给力明显减小;刀具后角的增大对主切削力影响不明显,但对进给力的影响比较明显。
The simulation model of cutting the TC4 titanium alloy by the cemented carbide tools was built based on De- form. The simulation model of the main cutting force was verified through the cutting experiment, and the relationship be- tween the cutting tool angles and the cutting force was studied by the simulation model. The results show that： The error between the main cutting force obtained by the simulation and obtained by the experiment is less than 10%. The simulation model, which has high reliability, can be applied to research on the cutting force in machining the TC4 titanium alloy. The results obtained by simulation show that： Within a certain range, the main cutting force and the feed force decrease obvi- ously with the increase of the cutting tool rake angle ; With the increase of the cutting tool relief angle, the influence on the main cutting force isn＇ t obvious, but the influence on the feed force is more noticeable.
出处
《工具技术》
2014年第5期17-20,共4页
Tool Engineering
基金
高档数控机床与基础制造装备科技重大专项(2012ZX04003-061)
