摘要
利用铜模吸铸法制备(Zr0.72Cu0.28)100-xAlx(x=0,2,4,6,8,10,12和14)合金棒状试样,研究了合金的非晶形成能力和析出相与力学性能之间的关系。结果表明,随着Al含量增加,非晶形成能力提高;析出相体积分数和尺寸减小,分布更加均匀;综合力学性能逐渐提高,x=12时抗压强度和塑性应变均达到最高值,分别为1 773MPa和7.45%。
（Zr0.72Cu0.28）100-xAlx（x=0,2,4,6,8,10,12,14）alloy rods were prepared with the ingot by copper mold with suction casting method.The glass forming ability,and the relation of the second phase and compressive mechanical property were investigated.The results show that,the glass forming ability of alloy increases with the increasing of Al content;volume fraction and grain size of precipitated phase decreases,simultaneously more uniform distribution;the mechanical properties has improved,the maximum compressive strength（σbc）and plastic strain（εP）are1 773MPa and 7.45% when x=12.
出处
《功能材料》
EI
CAS
CSCD
北大核心
2014年第8期8038-8041,8047,共5页
Journal of Functional Materials
基金
国家自然科学基金资助项目(50961008
51061008)
国家重点基础研究发展计划(973计划)前期研究专项资助项目(2011CB612203)
高等学校博士学科点专项科研基金资助项目(20116201120003)
甘肃省青年科技基金计划资助项目(1107RJYA275)
浙江省自然科学基金资助项目(LQ13E010002)
关键词
非晶复合材料
非晶形成能力
AL含量
析出相
力学性能
bulk metallic glass composite
glass forming ability
Al content
precipitated phase
mechanical property
