期刊文献+

层状LiNi_(0.5)Mn_(0.5)O_2正极材料的合成和电化学性能研究 被引量:1

Synthesis and electochemical performance of layered LiNi_(0. 5)Mn_(0. 5)O_2cathode
在线阅读 下载PDF
导出
摘要 通过改进的共沉淀方法成功合成了层状LiNi0.5Mn0.5O2正极材料,并对其结构、形貌以及电化学性能进行了测试。粉末X射线衍射结果表明,合成的LiNi0.5Mn0.5O2材料为层状α-NaFeO2结构,Li+和Ni2+混排很少。扫描电子显微镜结果显示,LiNi0.5Mn0.5O2材料是由形貌规则、大小均匀的亚微米级粒子构筑,粒子粒径分布在200~400 nm。另外,材料表现出了优异的电化学性能:在0.1 C的倍率下,材料的首次放电比容量为206 mAh·g-1,循环60次后,放电比容量为198 mAh·g-1,容量保持率为94.7%。即使在5 C倍率下,材料仍有157 mAh·g-1的首次放电比容量和良好的循环性能。 Abstract: A layered LiNi05 Mn05 02 cathode was successfully synthesized by an improved co-precip- itation method. The structure, morphology and electrochemical performance were investigated. The X-ray diffraction result revealed that the LiNio.sMn0.5 02 sample is a well defined, layered c^-NaFeO2 structure with little interlayer disorder of Li ~ and Ni2 +. The SEM results showed that the LiNi0. 5 Mn0. s 02 sample was constructed from uniform, regular, sub-micrometer particles with sizes of 200 -400 nm. In addition, the LiNio.sMno. s 02 cathode exhibited an excellent electrochemical performance. At a rate of 0. 1 C, it de- livered the first discharge capacity of 206 mAh ~ g-1 After 60 cycles, the discharge capacity was 198 mAh ~ g-i, and the capacity retention was as high as 95.6%. Even at a high rate of 5 C, it can still deliver a discharge capacity of 157 mAh ~ g-1 with an excellent recyclable performance.
出处 《黑龙江大学自然科学学报》 CAS 北大核心 2014年第2期218-222,共5页 Journal of Natural Science of Heilongjiang University
基金 国家自然科学基金资助项目(21201060) 黑龙江省博士后资助经费项目(LBH-Z11037)
关键词 LINI0 5Mn0 5O2 正极材料 电化学性能 共沉淀法 LiNi05 Mn05O2 cathode electrochemical performance co-precipitation
  • 相关文献

参考文献10

  • 1ISLAM M S, FISHER C A J.Lithium and sodium battery cathode materials:computational insights into voltage, diffusion and nanostructural prop-erties[J].Chem Soc Rev, 2014, 43(1):185-204.
  • 2OHZUKU T, MAKIMURA Y.Layered lithium insertion material of LiNil/2Mnt/202:a possible alternative to LiCoO2 for advanced lithium-ion bat-reties[J].Chem Lett, 2001,30(8):744-745.
  • 3XIAO L, LIU X J, Zhao X, et al.Preparation of LiNi0.5 Mno.5 02 cathode materials by urea hydrolysis coprecipitation [J].Solid State Ionics, 2011, 192(1):335-338.
  • 4HWANG B J, YU T H, CHENG Y, et al.Rapid microwave-enhanced ion exchange process for the synthesis of LiNi0.5 Mn0.5 02 and its character-ization as the cathode material for lithium batteries [J].J Mater Chem, 2009, 19 (6):4536-4544.
  • 5GU Y J, HU Y, LIU H Q, et al.Synthesis the precursor of LiNi0.5 Mn0.5 02 via an improved carbonate co-precipitation [J].Adv Mater Res, 2011,233-235(1):32-35.
  • 6SAKAMOTO K, HIRAYAMA M, KONISHI H.Structural changes in surface and bulk LiNi0.5 Mn0.5 02 during electrochemical reaction on epitaxial thin-film electrodes characterized by in situ X-ray scattering [J].Phys Chem, 2010, 12 (6):3815-3823.
  • 7KANG K, MENG Y S, CEDER G.Electrodes with high power and high capacity for rechargeable lithium batteries [J].Science, 2006, 3 (11):977-980.
  • 8MCCALLA E, ROWE A W, CAMARDESE J, et al.The role of metal site vacancies in promoting Li-Mn-Ni-O layered solid solutions[J].Chem Mater, 2013, 25(13):2716-2721.
  • 9LEE K S, MYUNG S T, MOON J S.Particle size effect of LiNio.sMno.502 prepared by co-precipitation [J].Electrochimica Acta, 2008, 53 (5):6033-6037.
  • 10ZHANG B, CHEN G, XU P, et al.Effect of ultrasonic irradiation on the structure and electrochemical properties of cathode material LiNi0.5 Mn0.5 02 for lithium batteries[J].Solid State Ionics, 2007, 178 (5):1230-1234.

同被引文献23

  • 1张碧泉,卢兆忠.化学二氧化锰的半导体性质与电池活性关系的研究[J].高等学校化学学报,1995,16(6):961-963. 被引量:4
  • 2CHENG F, ZHAO J, SONG W, et al. Facile controlled synthesis of MnO2 nanostructures of novel shapes and their application in batteries [ J ]. Inorg Chem, 2006, 45(5) : 2038 -2044.
  • 3DOSE W M, DONNE S W. Optimising heat treatment environment and atmosphere of electrolytic manganese dioxide for primary Li/MnO2 batteries [J]. J Power Sources, 2014, 247:852-857.
  • 4JOHNSON C S. Development and utility of manganese oxides as cathodes in lithium batteries [J]. J Power Sources, 2007, 165(2) : 559 -565.
  • 5DOSE W M, DONNE S W. Heat treated electrolytic manganese dioxide for primary Li/MnO2 batteries : effect of manganese dioxide properties on electrochemical performance [ J ]. Electrochim Acta, 2013, 105 : 305 - 313.
  • 6PREISLER E. Semiconductor properties of manganese dioxide [ J]. J Appl Electrochem, 1976, 6 (4) : 311 -320.
  • 7KIM S H, IM W M, HONG J K, et al. Factors controlling the stability of 03 - and P2-type layered MnO2 structures and spinel transition tendency in Li secondary batteries [J]. J Electruchem Soe, 2000, 147(2) : 413 -419.
  • 8FRANGER S, BACH S, FARCY J, et al. Synthesis, structural and electroehemieal eharaeterizations of the sol-gel birnessite MnOL84 " 0.6H20 [J]. J Power Sources, 2002, 109(2) : 262 -275.
  • 9ZENG J, WANG S, YU J, et al. AI and/or Ni-doped nanomanganese dioxide with anisotropic expansion and their electrochemical eharaeterisation in primary Li-MnO2 batteries [J]. J Solid State Electrochem, 2014, 18(6) : 1585 -1591.
  • 10LIU Q, WANG S,CHENG H. High rate capabilities Fe-doped EMD electrodes for Li/MnO2 primary battery [J]. Int J Electrochem Se, 2013, 8 (8) : 10540 - 10548.

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部