Laguerre Simulation and Visualization for Microstructure of Metal Materials 被引量：2

Laguerre Simulation and Visualization for Microstructure of Metal Materials

导出

摘要 Simulation method was designed to divide Laguerre diagram for right circle group with different weight; out-of-core incremental algorithm for Laguerre diagram was constructed; simulation program development and visualization was done and simulation was realized in user-specified arbitrary area for simulation of metal materials microstructure, which facilitated the practical application and secondary development of Laguerre diagram in the field of material science engineering. Finally, the utilization of a developed software package exemplified the simulation application of microstructure about metal materials and proved its validity. Simulation method was designed to divide Laguerre diagram for right circle group with different weight; out-of-core incremental algorithm for Laguerre diagram was constructed; simulation program development and visualization was done and simulation was realized in user-specified arbitrary area for simulation of metal materials microstructure, which facilitated the practical application and secondary development of Laguerre diagram in the field of material science engineering. Finally, the utilization of a developed software package exemplified the simulation application of microstructure about metal materials and proved its validity.

作者盛捷李俊琛

机构地区 School of Materials Science and Engineering State Key Laboratory of Gansu Advanced Non-Ferrous Metal Materials

出处《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2014年第1期164-167,共4页 武汉理工大学学报（材料科学英文版）

基金 Funded by National Natural Science Foundation of China(No.50571042) the Natural Science Foundation of Gansu Province of China(Nos.1208RJZA285,1208RJZA121) Lanzhou University of Technology(No.01-0278)

关键词 microstructure of metal materials Laguerre algorithm SIMULATION VISUALIZATION microstructure of metal materials Laguerre algorithm simulation visualization

分类号 TG14 [金属学及工艺—金属材料]

引文网络
相关文献

参考文献1

1方斌,黄传真,许崇海,刘增文,王景海.材料微观组织演变的蒙特卡洛仿真原理及应用[J].材料导报,2007,21(2):75-78. 被引量：2

二级参考文献37

1张继祥,关小军,孙胜,申孝民,董安平,刘运腾.晶粒长大过程微观组织演变Monte Carlo方法模拟[J].山东大学学报（工学版）,2005,35(4):1-5. 被引量：16
2罗伯D.计算材料学[M].北京:化学工业出版社,2002.254-284.
3Burke J E, Tumbull D. Recrystallization and grain growth[J]. Progress in Metal Physics, 1952, 3:220
4Fullman R L. Boundary migration during grain growth[C].Metal Interf. Cleveland Ohio: American Society for Metal,1952. 179
5Potts R B. Some generalized order-disorder transformations[J]. Proc Camb Phil Soc, 1952, 48:106
6Anderson M P, Srolovitz D J, Grest G S, et al. Computer simulation of grain growth-Ⅰ kinetcs [J]. Acta Metall,1984, 32(5) :783
7Srolovitz D J, Anderson M P, Sahni P S, et al. Computer simulation of grain growth-Ⅱ grain size distribution, topology, and local dynamics[J]. Acta Metall, 1984, 32(5) :793
8Gregory N Hassold, I-Wei Chen, David J Srolovtz. Computer simulation of final-stage: Ⅰ, model, kinetics, and microstructure [J]. J Am Ceram Soc, 1990, 73(10): 2857
9Elizabeth A Holm,Corbett C Battaile. The computer simulation of microstructural evolution [J]. JOM,2001,53(9) : 20
10Radhakrishnan B, Zaeharia T. Monte Carlo simulation of stored energy driven interface migration [J]. Modelling Simul Mater Sci Eng, 2003, (11): 307

共引文献1

1喇培清,张丹,郭鑫,吕蕊娇.铝热反应制备纳米晶Fe_3Al过程中过冷度对晶粒尺寸的影响[J].特种铸造及有色合金,2010,30(12):1082-1085. 被引量：1

同被引文献20

1陈晓东,侯小虎,白朴存,李继军,郎风超,刘飞.喷射沉积Al-Zn-Mg-Cu合金双级时效态试样裂纹扩展的原位电镜观察[J].稀有金属,2021,45(11):1403-1408. 被引量：2
2赵寿根,程伟.压电陶瓷材料电学性能参数测量研究[J].压电与声光,2005,27(2):200-202. 被引量：7
3李俊琛,李旭东,任淮辉.海量平面点集Voronoi图的构造算法[J].兰州理工大学学报,2007,33(4):102-105. 被引量：6
4李旭东.复合材料微观组织结构的计算机可视化表征[C]//中国材料研究学会.2004年材料科学与工程新进展,北京:冶金工业出版社,2004:1103-1111.
5李俊琛,李旭东,刘德学.空间点集Voronoi图的海量构造算法及可视化技术[J].兰州理工大学学报,2007,33(5):99-104. 被引量：7
6Li Jun - chen, Li Xu - dong, Sheng Jie. Multi - parameter design and simulation of composite microstructure [ J ]. Advanced Materials Research, 2011, 314:1 306 -1 312.
7Zhang Yu - fu, Guo Hai - xia, Li Jun -chen, et al. Simulation research of a type of pressure vessel under complex Loading Part 1 component load of the numerical analysis [ C ]//Proceedings of the 2012 2nd International Conference on Computer and In- formation Application. Taiyuan : Atlantis Press, 2012 : 685 - 689.
8Li Jun -chen, Sheng Jie, Zhang Yu - fu. Simulation research of a type of pressure vessel under complex loading part 2 complex load of the numerical analysis [ C ]//Proceedings of the 2012 2nd International Conference on Computer and Information Application. Taiyuan: Atlantis Press , 2012 : 690 - 694.
9盖学周.压电材料的研究发展方向和现状[J].中国陶瓷,2008,44(5):9-13. 被引量：29
10李俊琛,李旭东,盛捷.三维Laguerre模型的外存式增量算法及可视化技术[J].纳米技术与精密工程,2011,9(1):65-72. 被引量：1

引证文献2

1盛捷,李俊琛,康健,邬开俊.基于ANSYS的含缺陷压电陶瓷材料有限元仿真分析[J].福州大学学报（自然科学版）,2014,42(5):771-776.
2盛捷,DU Mingchen,LI Yufeng,MA Guocai,CHEN Weiqian,ZHENG Yuehong,ZHAN Faqi,REN Junqiang,G I Raab,喇培清.Deformation Mechanism of Bimodal Structured 2205 Duplex Stainless Steel in Two Yield Stages[J].Journal of Wuhan University of Technology(Materials Science),2023,38(1):184-191.

1杨光耀,王仲珏,朱协彬,房文亮.铸造工艺仿真设计后处理和工艺改进应用技术[J].特种铸造及有色合金,2014,34(11):1143-1146. 被引量：1
2Hamda Chagraoui,Mohamed Soula,Mohamed Guedri.A robust multi-objective and multi-physics optimization of multi-physics behavior of microstructure[J].Journal of Central South University,2016,23(12):3225-3238.
3韩德印,杨楠,李家永.Vericut软件在整体叶轮铣加工中的仿真应用[J].中国科技博览,2015,0(47):317-317.
4白应朕,郭菁莘,沈海宁,张长.复杂型腔数控加工在CATIA中的应用[J].中小企业管理与科技,2011(19):248-248.
5Wang Zhiping Lu Yang Xu Jianling Gansu University of Technology.MICROCOMPUTER PICTURE PROCESSING SYSTEM OF CAST-IRON METALLOGRAPHIC STRUCTURE[J].Chinese Journal of Mechanical Engineering,1997,10(4):45-49. 被引量：1
6赵秀娟,王春青,郑冠群,王国忠,杨士勤.Design of a visual system for predicting SMT solder joint shape[J].China Welding,1999,8(1):3-10. 被引量：1
7毛志钢,朱培玉,徐伟检,宋成仓.汽车覆盖件成形仿真应用[J].模具技术,2004(6):7-10. 被引量：7
8邱向东,贾厚生,钟俊辉.Recent Progress of New Nonferrous Metal Materials in China[J].Rare Metals,1994,13(2):149-158.
9喻祖建,李华基.板料多次拉深成形仿真过程关键技术研究[J].计算机仿真,2006,23(10):277-280.
10赵恒华,蔡光起.纳米加工分子动力学仿真应用及实例[J].制造技术与机床,2008(8):33-36. 被引量：2

Journal of Wuhan University of Technology(Materials Science)

2014年第1期

浏览历史

内容加载中请稍等...