期刊文献+

VGT涡轮喷嘴出口气流速度分布的试验研究 被引量:10

Investigation on Nozzle Exit Velocity Distribution of VGT
在线阅读 下载PDF
导出
摘要 使用 IFA30 0型热膜风速仪 ,通过选择合适的低通滤波器、采样频率和采样时间 ,用 X形探针测量了无叶喷嘴出口速度沿蜗壳周向和轴向的分布 ,并用概率统计方法对测量结果进行了处理。测试方法可行、方便、快速、自动化程度高。测量结果表明 :沿蜗壳周向 ,其径向速度分布较均匀 ,切向速度分布变化较大 ;沿蜗壳轴向 。 To understand the velocity field of vaneless nozzle exit of a double tongue board type VGT turbine scroll, the axial and peripheral distributions of the velocity was investigated with a X sensor of IFA300 hot film anemometer by proper selections of low pass filter, sample frequency and sample time. The measured results were treated with probability statistics. The method is applicable and convenient. The results showed that the peripheral distribution of its radial velocity was even and the peripheral variation of its tangential velocity was heavier; and both changed greatly around scroll axle direction.
出处 《农业机械学报》 EI CAS CSCD 北大核心 2000年第5期78-80,84,共4页 Transactions of the Chinese Society for Agricultural Machinery
基金 山东省优秀中青年科学家奖励基金资助项目!(项目编号 :972 5 3 118)
关键词 涡轮增压器 无叶喷嘴 速度分布 蜗壳 设计 Geometry turbocharger, Vaneless nozzle, Velocity distribution
  • 相关文献

参考文献8

二级参考文献32

  • 1王仁人,刘云岗,张锡朝,陆家祥.舌形挡板变截面涡轮增压器涡轮蜗壳内气体流动的研究[J].内燃机学报,1993,11(4):320-327. 被引量:11
  • 2陆家祥,秦立军,刘云岗,张锡朝.舌形挡板变截面涡轮(VGT)的研究[J].内燃机学报,1994,12(2):145-150. 被引量:15
  • 3刘云岗,邵莉,陆辰,张锡朝,陆家祥.增压柴油机自动控制微处理装置的开发[J].内燃机学报,1995,13(3):260-265. 被引量:4
  • 4三菱公司.TFO型增压器[J].国外内燃机,1993,(1).
  • 5李国祥 陆辰 等.热线风速仪输出信号的温度修正[J].计量学报,1997,18(1):57-61.
  • 6王仁人 陆家祥 等.用IFA300热线热膜风速仪X形探针测量速度场方法的研究[J].内燃机电脑应用,1996,3(1):8-17.
  • 7李国祥 王仁人.热线热膜风速仪X形探针的标定[J].气动实验与测量控制,1997,11(4):46-49.
  • 8王仁人 刘云岗 等.舌形挡板变截面涡累增压器涡轮蜗壳内气体流动的研究[J].内燃机学报,1993,(4).
  • 9陆家祥 刘云岗 等.舌形变截面涡轮(VGT)的研究[J].内燃机学报,1994,12(2).
  • 10陆家祥,1991年

共引文献24

同被引文献35

  • 1王仁人,刘云岗,张锡朝,陆家祥.舌形挡板变截面涡轮增压器涡轮蜗壳内气体流动的研究[J].内燃机学报,1993,11(4):320-327. 被引量:11
  • 2陆家祥,秦立军,刘云岗,张锡朝.舌形挡板变截面涡轮(VGT)的研究[J].内燃机学报,1994,12(2):145-150. 被引量:15
  • 3杨玟,吴承雄,沈建平,胡贵生.向心涡轮无叶蜗壳内三维湍流场的数值模拟[J].华中理工大学学报,1996,24(7):15-18. 被引量:6
  • 4李莉.径流式涡轮蜗壳内气体流动数值计算:硕士学位论文[M].济南:山东工业大学,1998..
  • 5张为民 顾宏中.无叶蜗壳径向涡轮喷嘴环的准三维流动计算分析.上海市内燃机学会第五届学术年会论文集(特辑)[M].,1992,10..
  • 6Hamed A, Baskharone E, Tabakoff W. A flow study in radial inflow turbine scroll- nozzle assembly[J]. ASME Journal of Fluids Enieering, 1978,100(3) :31 - 36.
  • 7Hamed A, Bakharone E A. Analysis of three dimensional flow in a turbine scroll. [J]. ASME Journal of Fluids Engineering,1980,102(3) :297 - 301.
  • 8Baskharone E A. Optimization of the three - dimensional flow path in the scroll - nozzle system of a radial inflow turbine[J]. ASME Journal of Engineering for gas turbine and power,1984,106(4) :511.
  • 9Shou - Rue Chen. Samuel S. Lee, Yuan Mao Huang. A mathematical model for the analysis of fluid flow in a scroll [J].Transactions of the ASME. Journal of Fluids Engineering.1986,108(3) :6- 11.
  • 10李国祥,博士论文,1996年

引证文献10

二级引证文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部