期刊文献+

便携式太阳能制氧机结构设计 被引量:3

Structure Design of Portable Solar Oxygen Concentrator
在线阅读 下载PDF
导出
摘要 目的:设计一种基于太阳能充电的便携式制氧机。方法:根据太阳能电池板的发电原理,通过柔性太阳能电池板将太阳能转化为电能并储存在储能电源中,采用变压吸附制氧工艺设计便携式制氧机。结果:便携式太阳能制氧机主要由制氧主机、太阳能电池板、储能电源及箱体组成.制氧流量为l~3L/min,氧气体积分数为50%一90%.储能电源充电时间约为7h,储能电源容量为40Ah,太阳能电池板输出电压为DCl2V。结论:太阳能充电为便携式制氧机提供了可靠的电源保障,延长了制氧机的使用时间,保证能及时制备应急呼吸用氧气,实现了无外接电源供应时制氧机的正常使用。 Objective To design a portable oxygen concentrator based on solar energy charging.Methods The portable oxygen concentrator was designed by adopting pressure swing adsorption process and the principle of solar panels generating electricity, and using flexible solar panels which converted solar energy into electricity and stored electricity in energy storage power. Results The portable solar oxygen concentrator consisted of the main oxygen concentrator, the solar panel, the energy storage cell and the box. The oxygen flow rate was between 1 L/min and 3 L/min and the oxygen concentration was between 50% and 90%. The power capacity of energy storage cell was 40 Ah and its charge time was about 7 h. The output voltage of so!ar panels was DC12 V. Conclusion Solar energy charging can realize the normal use of the oxygen concentrator when there is no exterior power supply, provide a reliable power support for emergency use, extend the service life, and make the oxygen generator generate breathing oxygen anytime and anywhere.
出处 《医疗卫生装备》 CAS 2014年第1期15-17,共3页 Chinese Medical Equipment Journal
关键词 太阳能 便携式制氧机 变压吸附 储能电池 高原 solar portable oxygen concentrator PSA energy storage cell high altitude
  • 相关文献

参考文献9

  • 1高钰琪.高原军事医学[M]重庆:重庆出版社,2005.
  • 2刘应书.缺氧环境制氧供氧技术[M]北京:冶金工业出版社,201030-37.
  • 3崔容强,王晨.太阳能电池检测系统基本原理[J].中国建设动态(阳光能源),2008(3):36-40. 被引量:7
  • 4张鹏,王兴君,王松林.小功率智能型太阳能控制器的设计[J].现代电子技术,2007,30(18):177-180. 被引量:20
  • 5Szweda R. Review of the third generation solar cells[J].Semiconductor Magazine,2003,(01):53-55.
  • 6周志敏;纪爱华.太阳能光伏发电系统设计与应用实例[M]北京:电子工业出版社,2010.
  • 7Kawamura T,Harada K,Ishihara U. Analysis of MPPT characteristics in photovoltaic power system[J].Solar Energy Materials and Solar Cells,1997.155-165.
  • 8Jeong-Geun Jee,Min-Bae Kim,Chang-Ha Lee. Pressure swing adsorption processes to purify oxygen using a carbon molecular sieve[J].Chemical engineering science,2005.869-882.
  • 9田津津,张玉文,王锐.变压吸附制氧技术的发展和应用[J].深冷技术,2005(6):7-10. 被引量:20

二级参考文献19

  • 1蒋继瑞.变压吸附—低温精馏组合式制氧机[J].深冷技术,1994(5):19-24. 被引量:3
  • 2卢一民,黄国华.太阳能光伏应用系统全日综合效率的判定──5kW光伏水泵系统的研究[J].太阳能学报,1994,15(4):368-376. 被引量:8
  • 3杜娟娟,裴云庆,王兆安.电动车铅酸蓄电池的脉冲快速充电设计[J].电源技术应用,2005,8(3):28-31. 被引量:21
  • 4沙占友.新型特种集成电源及应用[M].北京:人民邮电出版社,1999..
  • 5郜豫川 武可.PSA制氧技术研究和应用发展[A]..变压吸附设备技术交流会论文集[C].,2002.1-3.
  • 6李兰励.变压吸附技术在空分领域的开发应用[A]..变压吸附设备技术交流会论文集[C].,2002.11-17.
  • 7邵皓平 梁其煜.空气分离变压吸附有关技术讨论[A]..变压吸附设备技术交流会论文集[C].,1998.18-21.
  • 8龚建英.[D].西安:西安交通大学,2002.
  • 9顾飞龙 周建良.变压吸附(PSA)法气体分离提纯技术进展[A]..变压吸附设备技术交流会论文集[c].,1998.1-4.
  • 10王华金.大型变压吸附制富氧装置在工业中的应用及发展趋势[A]..变压吸附设备技术交流会论文集[C].,2002.4-10.

共引文献42

同被引文献52

  • 1濮春干.医用集中供氧技术的探讨[J].低温与特气,1994,12(4):58-61. 被引量:1
  • 2濮春干,崔十安.谈医用供氧技术[J].深冷技术,1994(3):46-49. 被引量:1
  • 3方世林,张民栓.羊八井一号隧道施工通风及供氧技术[J].现代隧道技术,2006,43(1):53-56. 被引量:4
  • 4刘应书,张辉,刘文海,等.缺氧环境制氧供氧技术[M].北京:冶金工业出版社,2010.
  • 5Jee J G,Kim M B,Lee C H.Pressure swing adsorption processes to purify oxygen using a carbon molecular sieve[J].Chem Eng Sci,2005,60(3):869-882.
  • 6Ruthven D M,Farooq S,Knaebel K S.Pressure swing adsorption[M].New York:VCH Publishers,1994.
  • 7Chai SW,Kothare MV,Sircar S.Rapidpressure swing adsorption for reduction of bed size factor of a medical oxygen concentrator[J].Ind Eng Chem Res,2011,50(14):8 703-8 710.
  • 8Chart Industries.Air Sep Series Standard Generators[EB/OL].[2015-03-19].http://www.chartindustries.com/Industry/Industry Products/Gas-Systems/Gas-Generation/Air Sep-Commercial-Products-Division/Air Sep-Products/Standard-Generaors.
  • 9Higuera F.Flame spread along horizontal solid fuel cylinders[J].P Combust Inst,2002,29(1):211-217.
  • 10灌氧机[EB/OL].[2015-03-19].http://www.invacare.com.cn/p_93.html?_id=266.

引证文献3

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部