期刊文献+

方形旋风分离器内部两相流场的PDA实验研究 被引量:24

AN EXPERIMENTAL STUDY ON THE GAS-SOLID TWO-PHASE FLOW IN A SQUARE CYCLONE SEPARATOR WITH DOWNWARD GAS EXIT BY 3D-PDA
在线阅读 下载PDF
导出
摘要 应用三维颗粒动态分析仪 (3D PDA)对方形下排气分离器内的气固两相流场进行了测试 ,得到了几种工况条件下的流场矢量分布。研究发现分离器方腔内的流场偏离其几何中心 ,并呈中间为强旋流动和边壁附近为弱旋的准自由涡区的特点 ,且在边角处存在局部小旋涡。不等温流场比等温流场要均匀一些 ,但旋流强度减弱 ,分离效率降低。研究结果对于分析分离器的分离机理和结构优化有一定的指导意义。 Three dimensional Particle Dynamic Analyzer (3D PDA) was employed to measure the gas solid two phase flow in a lab scale square cyclone separator with downward gas exit under 4 cases of different inlet velocity and particle concentration. The particle used in the test was glass bead of mean diameter 30~40μm.It's found that the center of the flow field deviated from the geometric center of the cyclone. The flow fields showed a feature of Rankine eddy, i.e. strongly swirling region in the central part and pseudo free eddy region of weak swirling intensity near the cyclone wall. Local vortex existed at the corners where the flow changed its direction sharply. When the cyclone wall was heated and the suspension temperature was elevated, it's found that the flow field became more uniform than that under room temperature condition. The local vortex at the corners were weakened and the swirling intensity became poorer which led to a decreased total mean separation efficiency from about 81% to 76.5%. The results of this paper provide a further understand of the separation mechanism and guidance for the optimization of the square cyclone separator structure.
出处 《中国电机工程学报》 EI CSCD 北大核心 2001年第2期42-45,55,共5页 Proceedings of the CSEE
基金 清华大学煤的清洁燃烧技术国家重点实验室开放课题基金! (0 6980 6 华中理工大学煤燃烧国家重点实验室开放课题基金! (9811)
关键词 循环流化床锅炉 方形旋风分离器 两相流场 三维颗粒动态分析仪 square cyclone separator with downward gas exit gas solid suspension 3D PDA
  • 相关文献

参考文献10

二级参考文献19

  • 1林志杰,陈汉平,刘德昌.下排气中温分离器型循环流化床锅炉的研究与设计[J].华中理工大学学报,1994,22(3):16-20. 被引量:4
  • 2李晓东.循环流化床气固分离技术的试验及理论研究[博士学位论文].杭州:浙江大学,1994..
  • 3由长福.方形分离器内气固两相流动的实验研究和数值模拟[博士学位论文].北京:清华大学,1996..
  • 4Liu Dechang,ASME,1990年,1期,585页
  • 5陈汉平,ASME,1990年,2期,1367页
  • 6刘德昌,ASME,1987年,1期,443页
  • 7陈汉平,Fluidized bed combustion,1991年
  • 8周世辉,气体中颗粒的分离,1991年
  • 9马广大,除尘器性能计算,1990年
  • 10许晋源,燃烧学(修订本),1990年

共引文献26

同被引文献301

引证文献24

二级引证文献157

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部