期刊文献+

金属纽扣中4种有害金属腐蚀与浸出的评价 被引量:2

Evaluation of Elution of Heavy Metals from Metal Buttons
在线阅读 下载PDF
导出
摘要 金属制品与人体汗液长期直接接触,会引起一些有害反应如皮肤过敏等现象,针对此,对金属纽扣中4种有害金属(镍、铜、锌、铝)腐蚀与浸出进行评价研究。本试验测试了市售3种金属纽扣中的金属释放量:浸泡方法参考EN1811:2011,将样品浸泡在30℃的人工汗液中,在不同的时间周期取样,定量分析浸出液中镍、铜、锌、铝的含量。结果表明,不同样品中的浸出元素存在差异,样品中的镍释放量均超出了欧洲技术委员会通过的"94/27/EC镍指令"中的限量;同时,铝、铜和锌的提取量也不能被忽略,其有害性也应被考虑,它们对健康的有害性也应得到相应评估。 Metals present in metal items may be due to the elution processes that occur in sweat cause harmful health effects, such as skin allergic reactions, on direct and prolonged contact with skin. Therefore, three different clothing accessories-metal buttons on sale were tested for metal leaching according to the method of EN1811: 2011: the samples were kept at 30 ℃in the artificial sweat solution for different time periods and then quantified. The results have shown that there is difference among the kinds of metal leaching in samples. The Ni release in sam- ples is much higher in concentration than allowed in The European Directive 94/27/EC. The elution of Cu, Zn and A1 cannot be negligible. Such samples present higher risks for human health and should be controlled prior to their launch in the market, and should be used with special attention.
出处 《针织工业》 北大核心 2013年第12期85-87,共3页 Knitting Industries
基金 宁波出入境检验检疫局科技计划项目(K20-2013)
关键词 金属纽扣 金属浸出量 评价 Metal Buttons Ni Release Heavy Metals Elution Evaluation
  • 相关文献

参考文献9

  • 1LIDEN C, CARTER S. Nickel re- lease from coins[J]. Contact Dermatitis, 2001, 44(3) : 160-165.
  • 2REZIC I, ZEINER M. Corrosion and elution of harmful metals from metal but- tons[J]. Materials and Corrosion, 2010, 61(8) : 715-719.
  • 3EN 1811:2011. Reference test method for release of nickel from products in- tended to come into direct and prolonged contact with skin [ S ].
  • 4CROSBY D G. Environmental toxi- cology and chemistry [M]. USA: Oxford University Press, 1998.
  • 5HUANG D, KONG J, SENG Y. Ef- fects of the heavy metal Cu^2+ on growth, development, and population dynamics of spodoptera litura (Lepidoptera: Noctu- idae) [J]. Journal of Economic Entomol- ogy, 2012, 105(1): 288-294.
  • 6ANSARI A A. THAKUR B D. Red listed dyes and chemicals used in tex- tiles : Health hazards, international norms andpossibleremedies[J]. Colourage, 1999, 46(11) :21-32.
  • 7BANKS W A. KASTIN A J. Alu- minum-induced neurotoxicity : alterna- tive in membrane function at the blood- brain barrier[J]. Neuroscience & Biobe- havioral Reviews, 1989, 13(1) : 47-53.
  • 8REZIC I,STEFFAN I. ICP-OES de- termination of metals present in textile materials [J ]. Microchem. J. 2007,85:46- 51.
  • 9傅科杰,杨力生,童鲁波,张旺笋,王爱兵,杨斌.纺织品中残留重金属的来源因素分析[J].检验检疫科学,2004,14(4):25-27. 被引量:32

共引文献31

同被引文献31

  • 1杨洁. 小纽扣勇拓"云市场"[N]. 嘉兴日报, 2014-12-27.
  • 2BAI Z M, SONG L, HU Y, et al. Investigation on flame retardancy, combustion and pyrolysis behavior of flame retarded unsaturated polyester resin with a star-shaped phosphorus-containing compound[J]. Journal of Analytical and Applied Pyrolysis, 2014, 105:317-326.
  • 3BAI Z M, SONG L, HU Y, et al. Preparation, flame retardancy, and thermal degradation of unsaturated polyester resin modified with a novel phosphorus containing acrylate[J]. Industrial & Engineering Chemistry Research, 2013, 52(36):12855-12864.
  • 4GIRODS P, ROGAUME Y, DUFOUR A, et al. Low-temperature pyrolysis of wood waste containing urea- formaldehyde resin[J]. Renewable Energy, 2008, 33(4):648-654.
  • 5GIRODS P, DUFOUR A, ROGAUME Y, et al. Pyrolysis of wood waste containing urea-formaldehyde and melamine-formaldehyde resins[J]. Journal of Analytical & Applied Pyrolysis, 2008, 81(1):113-120.
  • 6FENG Y S, MU J, CHEN S H, et al. The influence of urea-formaldehyde resins on pyrolysis characteristic and products of wood-based panels[J]. Bioresources, 2012, 7(4):4600-4613.
  • 7GIRODS P, DUFOUR A, ROGAUME Y, et al. Thermal removal of nitrogen species from wood waste containing urea formaldehyde and melamine formaldehyde resins[J]. Journal of Hazardous Materials, 2008, 159(2/3):210- 221.
  • 8WATANABE N, YANANOTO O, SAKAI M, et al. Combustible and incombustible speciation of Cl and S in various components of municipal solid waste[J]. Waste Management, 2004, 24(6):623-632.
  • 9ZHOU H, MENG A, LONG Y Q, et al. An overview of characteristics of municipal solid waste fuel in China:physical, chemical composition and heating value[J]. Renewable and Sustainable Energy Reviews, 2014, 36:107-122.
  • 10JIANG X G, LI C Y, CHI Y, et al. TG-FTIR study on urea-formaldehyde resin residue during pyrolysis and combustion[J]. Journal of Hazardous Materials, 2010, 173(1/2/3):205-210.

引证文献2

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部