摘要
通过测试分析了T800/环氧预浸料固化过程中性能参数的变化规律;针对热压罐工艺条件下复合材料整体化结构分阶段成型的特点,提出了一种基于应力传递的分阶段固化变形的有限元模拟方法;对于不同成型工艺的工型加筋壁板结构,将分阶段模拟得出的变形结果与测试结果进行了对比,并分析了成型工艺与变形量之间的关系。结果表明,本文中提出的模拟方法能够准确预报整体化结构的固化变形,变形与成型工艺密切相关,针对特定的结构与铺层,采用合理的工艺过程能够有效减小构件的固化变形。
The developing law of T800/epoxy prepreg property parameters during curing process was analyzed through tests. A finite element analysis （FEA） simulation method of staged cure-induced deformation based on stress transfer was proposed in view of phased molding of composite integrated structures under the autoclave conditions. For I-shaped stiffened structures fabricated in different processes, deformation results predicted by the phased simulation were compared to experimental results and relationships between different manufacture schemes and deformations were also analyzed. The results show that the simulation method proposed in this paper can accurately predict the cure induced deformations for the integrated structures, deformation is closely correlated with fabrication process, and selecting appropriate fabrication process for special structure and lay-up can effectively reduce the cured-induced deformations of composite structures.
出处
《复合材料学报》
EI
CAS
CSCD
北大核心
2013年第5期61-66,共6页
Acta Materiae Compositae Sinica
关键词
复合材料
整体化
分阶段
固化变形
有限元分析
composite
integrated
by stages
cure- induced deformation
finite element analysis （FEA）
