期刊文献+

改性聚对苯撑苯并双噁唑纤维增强聚酰亚胺复合材料的摩擦磨损性能 被引量:2

Tribological Properties of Modified Poly-p-phenylene Benzobisthiasole Fiber Reinforced Thermoplastic Polyimide Composite
在线阅读 下载PDF
导出
摘要 分别采用稀土溶液(RES)和偶联剂对聚对苯撑苯并双(口恶)唑(PBO)纤维进行表面改性处理,并评价了改性前后PBO与热塑性聚酰亚胺(TPI)复合材料的冲击性能和摩擦磨损性能.结果表明,RES和偶联剂都能够提高PBO纤维与TPI基体之间的界面结合性能,从而提高PBO/TPI复合材料的冲击性能和摩擦磨损性能,而且RES改性处理的方法更有效,在相同的试验条件下,经过RES处理的PBO/TPI复合材料的冲击性能和摩擦磨损性能最优.这是由于经RES改性处理后PBO纤维表面O/C的比率较大,表明RES改性处理PBO纤维表面的含氧活性官能团浓度较高,从而有效提高了纤维与树脂基体之间的结合性能. Rare earth solution (RES) and coupling agent surface modification were employed towards poly- p-phenylene benzobisthiasole (PBO) fibers, and impact and tribological properties of the untreated and treated PBO/TPI composites were evaluated. The results show that both RES and coupling agent surface modification can improve the interracial adhesion between PBO fibers and TPI matrix, and accordingly en hance the impact and tribological properties. Compared with the untreated and coupling agent treated PBO/TPI composites, the RES treated composite has better interfacial adhesion. The RES surface modifi- cation is the most effective one to improve the impact and tribological properties under the same test condi- tions. This is because that the ratio of oxygen/carbon on the surface of RES treated PBO fiber is the maxi- mal one, which indicates the content of polar groups on the surface of PBO fibers increases compared with the others. The increase in the amount of polar groups could strengthen the interfacial adhesion between PBO fibers and TPI matrix effectively.
作者 俞亮 程先华
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2013年第9期1341-1346,共6页 Journal of Shanghai Jiaotong University
关键词 聚对苯撑苯并双噁唑纤维 表面改性 界面黏着 摩擦磨损性能 poly-p-phenylene benzobisthiasole (PBO) fiber surface modification interfacial adhesion tri-bological properties
  • 相关文献

参考文献17

  • 1Hu Z, Huang Y D, Wang F, et al. Synthesis of no- vel single walled carbon nanotubes/poly (p-phenylene benzobisoxazole) nanocomposite [J]. Polymer Bulle- tin, 2011, 67 (9): 1731-1739.
  • 2Fatema U K, Gotoh Y. Highly adhesive metal plat- ing on Zylon~ fiber via iodine pretreatment [J] Applied Surface Science, 2011, 258 (2): 883-889.
  • 3张春燕,史子兴,冷维,印杰,朱子康.采用4,6-二氨基间苯二酚-对苯二甲酸盐合成聚苯撑苯并二噁唑[J].上海交通大学学报,2003,37(5):646-649. 被引量:14
  • 4宋波,傅倩,刘小云,庄启昕,韩哲文.环境因素对PBO纤维老化的影响和储存寿命预测[J].材料研究学报,2010,24(5):487-492. 被引量:17
  • 5Liu D, Chen P, Chen M, et al. Effects of argon plasma treatment on the interracial adhesion of PBO fiber/bismaleimide composite and aging behaviors[J]. Applied Surface Science, 2011, 257 (23): 1023%10245.
  • 6Tamargo Martinez K, Martinez-Alonso A, Villar- Rodil S, et al. Surface modification of high perform- ance polymeric fibers by an oxygen plasma: A com- parative study of poly (p-phenylene terephthalamide) and poly (p-phenylene benzobisoxazole) [J]. Journal of Chromatography A, 2011, 1218 (24): 3781-3790.
  • 7. Tamargo-Martinez K, Martinez-Alonso A, Montes- Moran M A, et al. Effect of oxygen plasma treat- ment of PPTA and PBO fibers on the interracial prop- erties of single fiber/epoxy composites studied by Ra- man spectroscopy [J]. Composites Science and Tech- nology, 2010, 71 (6): 784 790.
  • 8樊黎虹,钱军,刘小云,李欣欣,韩哲文.纳米TiO_2涂覆法改善PBO纤维/环氧树脂界面剪切强度[J].固体火箭技术,2010,33(4):472-476. 被引量:8
  • 9Wu G M, Shyng Y T, Kung S F, et al. Oxygen plasma processing and improved interfacial adhesion in PBO fiber reinforced epoxy composites [J]. Vacu- um, 2009, 5(1): 271 274.
  • 10王斌,金志浩,丘哲明,刘爱华.电晕处理对高性能PBO纤维的表面性能及其界面粘接性能的影响[J].复合材料学报,2003,20(4):101-106. 被引量:23

二级参考文献42

共引文献80

同被引文献28

  • 1范琳,陈建升,胡爱军,杨海霞,杨士勇.高性能聚酰亚胺材料的研究进展[J].材料工程,2007,35(z1):160-163. 被引量:22
  • 2于涛.耐高温非石棉纤维橡胶基密封复合材料的研制[D].南京:南京工业大学,2004.
  • 3GB/T1447-2005.纤维增强塑料拉伸性能试验方法[S].北京:全国纤维增强塑料标准化技术委员会,2005.
  • 4Romanowicz M. Progressive failure analysis of unidi-rectional fiber-reinforced polymers with inhomoge-neous interphase and randomly distributed fibers un-der transverse tensile loading[J]. Composites Part A:Applied Science and Manufacturing,2010,41(12):1829-1838.
  • 5Venkateshwaran N, Elayaperumal A,Sathiya G K.Prediction of tensile properties of hybrid-natural fibercomposites [ J ]? Composites Part B: Engineering,2012, 43(2) : 793-796.
  • 6Lee D J,Oh H,Song Y S,et al. Analysis of effec-tive elastic modulus for multiphased hybrid compos-ites[J]. Composites Science and Technology* 2012,72(2): 278-283.
  • 7Migneault S,Koubaa A,Erchiqui F,et al. Applica-tion of micromechanical models to tensile properties ofwood-plastic composites[J], Wood Science and Tech-nology ,2011,45(3) : 521-532.
  • 8Sevostianov I,Rodriguez-Ramos R,Guinovart-DiazR, et al. Connections between different models de-scribing imperfect interfaces in periodic fiber-rein-forced composites [J]. International Journal of Solidsand Structures, 2012, 49(13) : 1518-1525.
  • 9Harper L T,Qian C,Turner T A, etal. Representativevolume elements for discontinuous carbon fibre compos-ites. Part 1. Boundary conditions[J]. Composites Scienceand Technology, 2012,72(2) : 225-234.
  • 10Zhang B,Yang Z,Sun X,et al. A virtual experi-mental approach to estimate composite mechanicalproperties: Modeling with an explicit finite elementmethod [J]. Computational Materials Science,2010,49(3): 645-651.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部