摘要
The strength and stiffness contribution of infill masonry is generally ignored in the design, due to the uncertainty in the strength properties of masonry, separation of infill from frame, low tensile strength, brittle characteristics of masonry walls, less out of plane strength and stiffness, etc.. They are considered as nonstructural elements which is reasonable for the frames under gravity loads but it is not true for the frames under seismic loads. Contained masonry as infill in RC （reinforced concrete） frames provides better contact at the interface and a higher out of plane strength and stiffness. Considering the seismic action on the frames which are likely to be subjected to in-plane as well as out of plane shaking, a research work has been carried out by the authors to investigate the seismic performance of RC frames with and without contained masonry infill panels using FE （finite element） computer program （ANSYS-Ver. l 1） and experimentally using the tri-axial shake table to evaluate the methods proposed in IS-1893-2002 to calculate the fundamental natural frequency. The RC frames were designed and detailed as per IS （Indian Standard） specifications such as IS 456-2000, IS 1893-2002 and IS 13920-1993. Based on the experimental and analytical investigations, the contained masonry infill panels significantly affect the seismic load resisting characteristics of the RC frames. The IS 1893-2002 formulation does not predict the values and hence the recommendation needs to be validated with experimental results.
