期刊文献+

固定管板式换热器泄漏原因分析与设备选材 被引量:7

CAUSE ANALYSIS ON THE LEAKAGE OF FIXED TUBE PLATE HEAT EXCHANGER AND EQUIPMENT SELECTION
在线阅读 下载PDF
导出
摘要 结合低温甲醇洗装置的工艺介质特点,对甲醇水塔进料加热器的泄漏失效原因进行了总结,并采取了相应的解决措施,取得了较好的成效,已成功解决了该换热器的频繁泄漏问题,为整套系统长周期稳定运行提供了有利的保障。 Combining with the process medium characteristics of the low-temperature methanol wash unit,this paper summarizes the leakage failure of the feed heater for methanol water tower.Proper measures are taken to solve the problem and good results are achieved.The frequent leakage of the heat exchanger has been resolved successfully and this provides favorable guarantee for the long period stable operation of the whole system.
作者 李欣
出处 《石油化工设备技术》 CAS 2013年第2期17-20,5-6,共4页 Petrochemical Equipment Technology
关键词 低温甲醇洗 进料加热器 固定管板式 换热器 失效分析 Low temperature methanol wash Feed heater Fixed tube plate heat exchanger Failure analysis
  • 相关文献

参考文献3

二级参考文献2

共引文献20

同被引文献46

  • 1时俊杰,黄卫东.板壳式换热器泄漏原因分析及改进[J].石油化工设备,2005,34(3):77-78. 被引量:4
  • 2郝世友.蒸汽冷凝液回收用作脱盐水[J].齐鲁石油化工,2005,33(2):116-118. 被引量:5
  • 3王海波,刘鹏,王晓明,朱巨贤,许燕.管壳式换热器壳程流动分析与部分结构设计[J].石油化工设备,2005,34(4):22-25. 被引量:7
  • 4蒋文春,巩建鸣,陈虎,涂善东.换热器管子与管板焊接接头残余应力数值模拟[J].焊接学报,2006,27(12):1-4. 被引量:26
  • 5刘品涛.换热器泄漏的原因分析及解决方案[J].化肥工业,2007,34(5):57-58. 被引量:2
  • 6Xu Shugen,Zhao Yanling. Using FEM to determine the thermo-mechanical stress in tube to tube-sheet joint for the SCC failure analysis[J]. Engineering Failure Analysis, 2013( 34 ) 24-34.
  • 7Xu Shugen,WangWeiqian Numerical investigation on wekt residual stresses in tube to tube sheet jmint of a heat exchanger [J].International Journal of Pressure Vessels and Piping,2013 ( 101 ) :37-44.
  • 8Jiang W C,Wang B Y,Gong J M,et cd. Finite element analysis of the effect of welding heat input and layer number on residual stress in repair welds for a stainless steel clad plate[J]. Materials & Design, 2011 ( 32 ) : 2851-2857.
  • 9Jiang Wenehun,Xu X P,Gong J M,et al. Influence of repair length on residual stress in the repair weld of a clad plate[J]. Nuclear Engineering and Design, 2012 (246) : 2 11-219.
  • 10Pratihar S,Tmki M,Edwards L,et al. Neutron diffraction residual stress measurements in a 316L stainless steel bead -on-plate weld specimetO]. International Journal of Pressure Vessels and Piping 2009,86( 1 ) : 13-19.

引证文献7

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部