摘要
为提高压裂改造效果,须优选出合理的裂缝参数。目前国内外优选裂缝参数时,只对裂缝条数、长度、间距、导流能力进行优化研究,没有考虑水平井裂缝布放方式对压裂水平井产能和含水率的影响。为此,文中以某低渗透油藏七点注采井网单元为例,采用数值模拟方法,在水平井分段压裂裂缝参数单因素分析基础上进行水平井布缝方式优化研究,评价了裂缝参数对井网单元开发指标的影响,最后优选出合理的水平井分段压裂裂缝参数。研究结果表明:考虑注水井的影响,为避免水突进,水平井布缝时,裂缝要错开注水井排布,靠近注水井的裂缝要短些,可以不等间距、不等长度排布,在获得较高产能的同时保证含水率也较低;合理的水平井布缝方式可提高单井产量和区块采出程度,使含水率上升缓慢,可提高水平井分段压裂改造效果和经济效益。该研究为同类油藏压裂施工设计提供了有效依据。
In order to improve the fi＇acturing effect, it is necessary to optimize appropriate fracture parameters. At present, the nptinlizatinn of fi＇acture number, fracture length, fracture spacing and fracture conductivity only are studied, hut the influence of fracture laying patterns on productivity and water cut of the fracturing horizontal well is not eonsidered. So taking a certain seven-spot injection-production pattern in low permeability reservoir as an example, by means of reservoir numerical simulation, the optimization of fracture laying patterns is studied on the basis of single factor analysis on fi＇aeture parameters of the nmlti-stage fracturing horizontal well. At the same time, the effect of fracture parameters on development index ot＂ the well pattern unit is evaluated, and reasonable fracture paramete~ are optimized. The results show that taking injection wells into account and keeping from water hreakthrnugh, fractures are arranged staggering injection wells and fractures near to injection wells are shorter on the optimization of fracture laying patterns. Fractures are also placed with unequal fracture length and fracture spacing, which can not only obtain higher pr^duetivity hut also haw~ lower water cut. Reasonable fracture laying patterns can improve single well production and hlock degree of reserves recovery, lead to water cut to rise slowly, and be benefit for enhancing horizontal well muhi-stage fracturing eft^ct and economic benefit, which provides effective foundation for the fracturing operation design of similar reservoirs.
出处
《断块油气田》
CAS
2013年第3期373-376,共4页
Fault-Block Oil & Gas Field
基金
"十二五"国家科技重大专项子课题"低渗气藏水平井分段压裂及控水完井技术研究"(2011ZX05022-006-004HZ)
关键词
低渗透油藏
水平井
分段压裂
数值模拟
裂缝参数优化
布缝方式
low permeability reservoir
, horizontal well
muhi-stage fracturing
numerical sinmlation
fracture parameter optimization
fi＇actnre laying pattern
