摘要
现有的分层抽取法不能测试沉积过程中淤泥强度的变化,并且需要使用较多的孔隙水应力传感器导致试验成本很高。因此对此方法进行了改进,主要有研制了可测试强度极低淤泥的室内微型高精度十字板剪切仪和一个孔隙水应力传感器切换测试沉积柱不同高度处孔隙水应力的装置。由试验结果可知实测的数据完全满足需要,证明此方法是可行的。利用改进的分层抽取法可得到淤泥沉积过程中的泥水分界面高度、含水率(密度)、超静孔隙水应力、有效应力、颗粒分布、强度、压缩性、渗透性等参数的变化规律,可研究时间尺度较大的沉积淤泥的大变形自重固结和强度问题,并为进一步进行大变形自重固结的数值模拟提供了基础。
The existing multilayer extraction sampling cannot test shear strength of dredged material during deposition process, and the cost is high because it needs a pore water pressure sensor at each selected pressure tapping. So the multilayer extraction sampling is improved, mainly including a laboratory miniature high-precision shear vane apparatus and an apparatus that one pressure sensor connects successively automatically to each pressure tapping at different heights of sediment column. The experimental results show that the measured data are reasonable and the improved test method is feasible. The improved multilayer extraction sampling can test the level of the mud-water interface, water content （density）, excess pore water pressure, effective stress, grain size distribution, undrained shear strength, compressibility, and permeability, ect. Self-weight consolidation and shear strength of the dredged material during deposition process can be studied. The experimental results can be used for numerical simulation of large strain self-weight consolidation.
出处
《岩土工程学报》
EI
CAS
CSCD
北大核心
2013年第5期916-921,共6页
Chinese Journal of Geotechnical Engineering
基金
国家重点基础研究发展计划(973计划)项目(2012CB719804)
海洋公益性行业科研专项经费重大项目(201105024)
关键词
改进的分层抽取法
室内微型高精度十字板剪切仪
淤泥沉积
自重固结
不排水强度
improved multilayer extraction sampling
laboratory miniature high-precision shear vane apparatus
dredged material deposition
self-weight consolidation
undrained shear strength
