期刊文献+

横向限制下凝固微观组织演化的相场法模拟 被引量:3

Phase-field simulation of solidified microstructure evolution in the presence of lateral constraint
原文传递
导出
摘要 凝固过程中横向限制挡板的存在对晶体微观结构的演化存在重要的影响,不同性质的横向挡板将产生不同的限制效应,对最终凝固微观组织形成起着决定性作用.本文利用非等温相场模型,定性地模拟了纯金属Ni凝固过程中横向限制的存在对其枝晶微观形貌演化的影响,研究了不同尺寸及性质的横向挡板对枝晶微观结构形成的影响,讨论了横向限制对不同初始枝晶间距枝晶形貌发展的作用.计算结果表明,横向限制挡板的存在将直接影响凝固过程中微观组织的形貌演化过程并最终改变微观结构.随着横向挡板间距的减小,微观组织变化更加明显;挡板初始温度越低,枝晶形貌改变越明显;初始枝晶间距越大,形貌变化越明显;不同挡板高度对微观结构具有基本相同的影响. Lateral constrain in the presence of melting has a significant effect on microstructure evolution of crystal growth,and this effect is related to the size and property of lateral constrain,thus determining microstructure formation during solidification.In the paper,microstructure evolution in the presence of lateral constrain during the solidification of pure Ni metal is simulated using a non-isothermal phase-field model.Effects of size and properties of lateral constrain are simulated and studied,also microstructures formed at different initial dendritic arm distances are discussed.Results indicate that the presence of lateral constrain has a direct influence on pattern evolution which determines the microstructure formation.Microstructure changes significantly with lateral constrain distance turning small,initial constrain temperature low becoming low and initial dendrite arm distance growing.Different heights of lateral constrains have almost the same effects on microstructure change during solidification.
出处 《物理学报》 SCIE EI CAS CSCD 北大核心 2013年第10期318-323,共6页 Acta Physica Sinica
基金 国家重点基础研究发展计划(批准号:2010CB631202) 西北工业大学基础研究基金(批准号:JC201272)资助的课题~~
关键词 相场模拟 微观组织演化 横向限制 phase-field simulation microstructure evolution lateral constraint
  • 相关文献

参考文献6

二级参考文献55

共引文献40

同被引文献41

  • 1刘光廷,薛慧,陈凤歧,张国新.混凝土、砂浆早期温度断裂韧性实验研究[J].清华大学学报(自然科学版),1996,36(1):95-101. 被引量:2
  • 2李俊杰,王锦程,许泉,杨根仓.外来夹杂物颗粒对枝晶生长形态影响的相场法研究[J].物理学报,2007,56(3):1514-1519. 被引量:10
  • 3ASTA M, BECKERMANN C, KARMA A, KURZ W, NAPOLITANO A, PLAPP M, PURDY G, RAPPAZ M, TRIVEDI R, Solidification microstructures and solid-state parallels: Recent developments, future directions[J]. Acta Materialia, 2009, 57: 941-971.
  • 4YAN Z M, LI X T, CAO Z Q, ZHANG X A, LI T J. Grain refinement of horizontal continuous casting of the CuNil0FelMn alloy hollow billets by rotating magnetic field (RMF)[J]. Materials Letters, 2008, 62: 4389-4392.
  • 5YASUDA H, TOH T, IWAI K, MORITA K. Recent progress of EPM in steelmaking, casting, and solidification processing[J]. ISIJ International, 2007, 47(4): 619-626.
  • 6EASTON M, DAVISON C, JOHN D Jr. Effect of alloy composition on the dendrite arm spacing of multicomponent aluminum alloys[J]. Metallurgical Transactions A, 2010, 41(6): 1528-1538.
  • 7AN G Y, LIU L X. Dendrite spacing in unidirectional solidified A1-Cu alloy[J]. Journal of Crystal Growth, 1987, 80(2): 383-392.
  • 8FABIETTI L M, SEETHARAMAN V, TRIVEDI R The development of solidification mierostructures in the presence of lateral constraints[J]. Metallurgical Transactions A, 1990, 21: 1299-1310.
  • 9WANG Gang, ZENG De-chang, L1U Zbong-wu. Phase field calculation of interface mobility in a ternary alloy[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(6): 1711-1716.
  • 10KOBAYASHI R. Modeling and numerical simulations of dendritic crystal growth[J]. Physica D, 1993, 63: 410-423.

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部