期刊文献+

正弦激励作用下磁流变阻尼器温升理论与试验研究 被引量:11

Heating of Magnetorheological Dampers under Sine Motion: Theoretical and Experimental Study
在线阅读 下载PDF
导出
摘要 研究磁流变阻尼器温升理论模型,为分析和改进阻尼器温度特性做铺垫。在分析磁流变阻尼器温升原理的基础上,提出两种大振幅正弦激励作用下磁流变阻尼器的温升理论模型:一种以阻尼器中的磁流变液为研究对象,根据简化的流体单元一维传热模型而建立,该模型适合筒壁较厚的磁流变阻尼器,且估算温度比实际值高;另一种以磁流变阻尼器整体为研究对象,采用集总参数法(Lumped parameter method)而建立,该模型估算温度比实际值低。两种理论模型能预测磁流变阻尼器内部温度随时间的变化范围,并通过试验验证实测温度位于这两种理论模型所确定的温度范围内。实际应用中,根据磁流变阻尼器的结构尺寸来选用合适的理论模型进行分析,也可通过对两种理论模型的温度解进行加权平均来求得精确的温度解。 The temperature rise model of magnetorheological(MR) dampers is investigated to eliminate or minimize the effect of high temperature on their damping characters. Based on the temperature rise principle of MR dampers, two different temperature rise models are developed under the large amplitude sine excitation, respectively. According to simplified one-dimensional equation of heat transfer through a fluid element, one model is developed on the MR fluid within MR dampers and is fit for MR dampers with thick-wall hydraulic cylinder, and the predicted temperature is higher than the test temperature. The other model is developed on the MR damper, and corresponding predicted temperature is lower than the test temperature. Solutions of model equations are derived for the temperature rise within the damper as a function of time to predict the temperature range within MR dampers. An experiment result shows the tested temperature is in the range of predicted temperatures. According to structural parameters of MR dampers, the proper theory model is chosen to predict the temperature in practical applications, or an exact solution can be obtain with two different temperatures weighted mean.
出处 《机械工程学报》 EI CAS CSCD 北大核心 2013年第8期123-128,共6页 Journal of Mechanical Engineering
基金 国家自然科学基金(50830202 51073179) 中央高校基本科研业务费科研专项(CDJZR10120005) 国家科技支撑计划(2012BAF06B04)资助项目
关键词 磁流变液 阻尼器 温升 热传导 Magnetorheological fluid Damper Temperature rise Heat transfer
  • 相关文献

参考文献11

  • 1DYKE S J, SPENCER JR B F, SAIN M K, et al. Anexperimental study of MR dampers for seismicprotection[J]. Smart Materials and Structures, 1998,7(5):693-703.
  • 2KIM Y,LANGARI R,HURLEBAUS S. Semiactivenonlinear control of a building with a magnetorheologicaldamper system[J], Mechanical Systems and SignalProcessing, 2009, 23(2): 300-315.
  • 3DYKE S J, SPENCER Jr B F,SAIN M K, et al.Modelling and control of magnetorheological dampers forseismic response reduction[J]. Smart Materials andStructures, 1996, 5(5): 565-576.
  • 4KARKOUB M A, ZRIBI M. Active/semiactivesuspension control using magnetorheological actuators [J].International Journal of Systems Science,2006,37(1):35-44.
  • 5LIAO W H, WAND D H. Semiactive vibration control oftrain suspension systems via magnetorheologicaldampers[J]. Intelligent Material Systems and Structures,2003, 14: 161-172.
  • 6CHOI Y T, WERELEY N M,JEON Y S. Semi-activevibration isolation using magnetorheological isolators[J].Journal of Aircraft, 2005,42(5): 1244-1251.
  • 7JOHN S, CHAUDHURI A, WERELEY N M. Amagnetorheological actuation system: Test and model[J].Smart Materials and Structures, 2008, 17(4): 045021.
  • 8MAKRIS N. Viscous heating of fluid dampers. I :Small-amplitude motions[J]. Journal of EngineeringMechanics, 1998,124(11); 1210-1216.
  • 9MAKRIS N, ROUSSOS Y,WHITTAKER A S, et al.Viscous heating of fluid dampers. II: Large-amplitudemotions[J]. Journal of Engineering Mechanics, 1998,124(11): 1217-1223.
  • 10GORDANINEJAD F, BREESE D G Heating ofmagnetorheological fluid dampers[J]. Journal Intelligentof Material Systems and Structures, 1999,10(8): 634-645.

同被引文献83

引证文献11

二级引证文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部