期刊文献+

平板式预混燃烧器的污染物排放特性

Pollutant Emission Characteristics of Flat Plate Premixed Burner
在线阅读 下载PDF
导出
摘要 利用多引射器混合结构实现燃气和空气的完全混合,设计了平板式预混燃烧器,研究了燃烧器污染物排放特性与空气系数、喷嘴直径、热负荷比的关系.实验结果表明:平板式预混燃烧器实现了NO和CO的低排放;NO和CO的排放量随着空气系数的增大而减小;喷嘴直径越大,燃气和空气接触面越大,混合效果越好,CO的排放量越小;当空气系数为1.25时,全预混燃烧器烟气中折算为空气系数为1时NO排放为40×10-6,达到了氮氧化物的第5排放等级. To realize the premixing of gas and air using muti-ejector, a flat plate premixed burner was proposed. The effects of air coefficient, nozzle diameter and thermal load ratio on the pollutant emission of burner were experimen- tally studied. It is found that lower NO and CO emissions of the designed flat plate premixed burner are realized. NO and CO emissions decrease with the increase of air coefficient. The larger the diameter of the nozzle, and the greater the gas and air contact surface, the better mixing effect and the smaUer amount of CO emissions will be realized. When air ratio is 1.25, NO emission is 40 x 10-6, which reaches the fifth grade of NO emission.
出处 《燃烧科学与技术》 EI CAS CSCD 北大核心 2013年第2期187-191,共5页 Journal of Combustion Science and Technology
关键词 平板式 预混燃烧 引射器 燃烧器 flat plate premixedcombustion ejector burner
  • 相关文献

参考文献9

  • 1周庆芳,杨庆泉,沈亦冰,全惠君.燃气热水器浓淡燃烧低NO_x燃烧器的模拟分析[J].煤气与热力,2004,24(12):665-669. 被引量:8
  • 2Brenner G, Pickenacker K, Pickenacker O, et al. Nu- merical and experimental investigation of matrix- stabilized methane/air combustion in porous inert me- dia[J]. Combustion and Flame, 2000, 123(1) : 201-213.
  • 3Hsu P F, Evans W D, Howell J R. Experimental and numerical study of premixed combustion within nonho- mogeneous porous ceramics[J]. Combustion Science Technoloev, 1993, 90(1/2/3/4): 149-172.
  • 4Mobbauer S, Pickenacker O, Pickenacker K, et al. Application of the porous burner technology in energy and heat-engineering[J]. Clean Air, 2002, 3 (2) : 185- 198.
  • 5Rortveit G J, Zepter K, Skreiberg O, et al. A compari- son of low-NOx burners for combustion of methane and hydrogen mixtures [J]. Proceedings of Combustion Insti- tute, 2002, 29(1): 1123-1129.
  • 6Bizzi M, Saracco G, Specchia V. Improving the flashback resistance of catalytic and non-catalytic metal fiber burners [J]. Chemical Engineering Journal, 2003, 95(1/2/3) : 123-136.
  • 7Saracco G, Cerri I, Specchia V, et al. Catalytic pre- mixed fibres burners [J]. Chemical Engineering Sci- ence, 1999, 54(15/16): 3599-3608.
  • 8Cerri I, Saracco G, Geobaldo F, et al. Development of a methane pre-mixed catalytic burner for domestic appli- cations [J]. Industrial and Engineering Chemistry Re- search, 2000, 39(1): 24-33.
  • 9Cerri I, Saracco G, Specchia V, et al. Improved- performance knitted fiber mats as supports for pre-mixed natural gas catalytic combustion[J]. Chemical Engineer- ingJournal, 2001, 82(1): 73-85.

二级参考文献14

共引文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部