期刊文献+

叶蜡石对PET/ABS/磷酸蜜铵盐(MP)复合材料性能的影响初探 被引量:1

Influences of Pyrophyllite on the Properties of PET/ABS/MP Blends
原文传递
导出
摘要 采用叶蜡石协效提高聚对苯二甲酸乙二醇酯(PET)/丙烯腈-苯乙烯-丁二烯共聚物(ABS)/磷酸蜜胺盐(MP)复合材料体系的阻燃性能,通过力学性能测试、极限氧指数测试、垂直燃烧实验、热重分析、熔体流动速率测试、扫描电镜分析以及动态频率扫描测试,研究叶蜡石对PET/ABS/MP复合材料性能的影响.实验结果表明,加入适量的叶蜡石可在一定程度上提高复合体系的拉伸强度、弯曲强度、缺口冲击强度和熔体流动速率;当叶蜡石质量分数为4%时,其与MP协效阻燃性能最好,残炭率最高;体系的储能模量(G')与损耗模量(G″)随叶蜡石增加呈现先下降后上升的趋势. Pyrophyllite was employed to enhance the synergistic flame retardancy for PET/ ABS/MP blends. The influences of different proportions of pyrophyllite on various properties of PET/ABS/MP blends were studied by mechanical test, melt flow rate test, LOI, UL-94, TG, SEM and dynamic frequency sweep test. The results show that the tensile strength, flexural strength, notched impact strength and melt flow rate of PET/ABS/MP blends increase with increas- ing pyrophyllite to an appropriate amount. 4% pyrophyllite is found to be the optimum concentration for enhancement of the synergistic flame retardancy and charring of PET/ABS/MP blends. It is also clear that raising the dosage of pyrophyllite results in increasing the storage modulus (G') and the loss modulus (G") of the system to a peak value and decreasing subsequently.
出处 《福建师范大学学报(自然科学版)》 CAS CSCD 北大核心 2013年第1期75-80,共6页 Journal of Fujian Normal University:Natural Science Edition
基金 福建省自然科学基金资助项目(2011J01287)
  • 相关文献

参考文献9

  • 1Cook W D, Zhang T, Moad G, et al. Morphology-property relationships in ABS/PET blends Ⅰ. Compositional effects [J]. J Appl Polym Sci, 1996, 62 (10) : 1699 -1708.
  • 2Cook W D, Zhang T, Moad G, et al. Morphology-property relationships in ABS/PET blends Ⅱ. Compositional effects [J]. J Appl Polym Sci, 1996, 62 (10): 1701 -1714.
  • 3Paul S, Kale D D. Blends of acrylonitrile-butadiene-styrene/waste poly ( ethylene terephthalate) compatibilized by styrenemaleic anhydride [J]. J Appl Polym Sci, 2001, 80 (13) : 2593 -2599.
  • 4赵国栋,陈磊,张圣博,刘占伟,蔡绪福.ABS/PET合金的组成配比及SMA的增容化研究[J].塑料工业,2009,37(9):17-21. 被引量:11
  • 5卢星,陈全庆.用高分辨电镜确定脱水叶腊石结构[J].电子显微学报,1988,3:167.
  • 6Robertson R H S. Industrial uses of clay minerals [J]. Silicates Industriels, 1973, 38 (1) : 33 -43.
  • 7Sanchez Soto P J, Perez Rodriguez J L. Caracteristicas generales, propiedades, yacimientosy applicaciones de pirofilita [ J]. Boletin de Sociedad Espanola de Ceramica Vidrio, 1998, 37 (5) : 359 -368.
  • 8傅轶,李小辉,秦家强.成核剂对玻纤增强阻燃PET性能的影响研究[J].合成材料老化与应用,2012,41(1):11-15. 被引量:4
  • 9Michael J Solomon. Abdulwahab S A1musallam, Kurt F Seefeldt, et al. Rheology of polypropylene/clay hybrid materials [J]. Macromolecules, 2001, 34 (6): 1864-1872.

二级参考文献23

  • 1陈俊,陈剑玲,刘正英,殷茜,黄锐.PET结晶行为研究进展[J].高分子通报,2005(1):20-24. 被引量:32
  • 2王璐,郭宝华,谢续明.ABS的MAH/St多单体熔融接枝及其对PA6/ABS共混体系相形态和力学性能的影响[J].高分子学报,2005,15(2):213-218. 被引量:20
  • 3张长安,黄关葆,尤维峰.工程塑料用PET的结晶性能研究[J].合成技术及应用,2005,20(4):25-28. 被引量:8
  • 4COOK W D,ZHANG T,MOAD G,et al.Morphologyproperty relationships in ABS/PET blends.Ⅰ.compositional effects[J].J Appl Polym Sci,1996,62 (10):1699-1708.
  • 5COOK W D,MOAD G,FOX B,et al.Morphology-property relationships in ABS/PET blends.Ⅱ.influence of processing conditions on structure and properties[J].J Appl Polym Sci,1996,62 (10):1709-1714.
  • 6PAUL S,KALE D D.Blends of acrylonitrile-butadiene-styrene/waste poly (ethylene terephthalate) compatibilized by styrene maleic anhydride[J].J Appl Polym Sci,2001,80(13):2593-2599.
  • 7BASU D,BANERJEE A.Determination of optimum compatibilizer (SMA) concentration for PBT/ABS (70/30) blend using tensile strength data[J].J Appl Polym Sci,1997,64 (8):1485-1487.
  • 8CARTE T L,MOET A.Morphological origin of super toughness in poly (ethylene terephthalate) /polyethylene blends[J].J Appl Polym Sci,1993,48:611-624.
  • 9UTRACKI L A.Commercial polymer blends[M].London:Chapman & Hall,1998:356.
  • 10Xanthos M,Baltzis B C,Hsu P P.J Appl Polym Sci,1997,64:1423-1435.

共引文献13

同被引文献9

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部