期刊文献+

高g值加速度传感器的窄脉冲校准理论与方法 被引量:15

Theory and Method for Calibration of High-g Accelerometers with a Narrow Shock Pulse
在线阅读 下载PDF
导出
摘要 针对高g值加速度传感器动态特性校准中遇到的激励窄脉冲的宽度问题,提出了适用于高g值加速度传感器动态特性的窄脉冲校准准则。该准则给出了对不同谐振频率的高g值加速度传感器的动态特性进行校准时,校准所需的激励窄脉冲的最大脉冲宽度与传感器谐振频率的关系。依据该准则设计了窄脉冲校准系统,并对8309型高g值加速度传感器进行了校准实验。实验结果表明,该准则对于高g值加速度传感器频率响应特性的校准是有效的,按照该准则所定脉宽的脉冲能够激起被较准的高g值加速度传感器的各阶谐振频率。 In order to determine the duration of shock pulse excited a high-g accelerometer,a calibration principle was put forward in this paper.For the accelerometers with different natural frequency,this principle presented the relationship of the maximum excited pulse duration and the accelerometer natural frequency used in the dynamic characteristic calibration of a high-g accelerometer.According to the principle,a narrow pulse shock calibration system was designed and a set of calibration tests was conducted for a high-g piezoelectric accelerometer 8309.It was demonstrated that this principle is effective for amplitude-frequency response characteristic calibration of a high-g accelerometer and various resonance frequencies of a high-g accelerometer were excited using a shock pulse whose duration is determined by the above principle.
出处 《传感技术学报》 CAS CSCD 北大核心 2012年第9期1242-1245,共4页 Chinese Journal of Sensors and Actuators
基金 山西省青年科技研究基金项目(2008021015) 武器装备预研基金项目(9140C1204050609)
关键词 测试计量技术及仪器 动态校准 窄脉冲激励 高g值加速度传感器 measuring and testing technologies and instruments dynamic calibration narrow pulse excitation high-g accelerometer
  • 相关文献

参考文献14

  • 1Ueda K, Umeda A. Improvement of Novel NRLM Method for A ccel-erometer Characterization to the Range 102 ms-2 [J]. Sensors and Actuator A ,1996,54( 1 ) :517-522.
  • 2Bateman V I,Brown F A,Davie N T,et al. High Shock,High Fre- quency Characteristics of a Mechanical Isolator for a Piezoresistive Accelerometer[ R]. SAND-95-1272C. San-dia National Labs, Al- buquerque, NM, USA, 1995 : 1 - 12.
  • 3梁志国,李新良,孙璟宇,连大鸿.激光干涉法一次冲击加速度计动态特性校准[J].测试技术学报,2004,18(2):133-138. 被引量:24
  • 4黄俊钦,顾建雄.高g值加速度计和压电式力传感器的动态校准[J].计量学报,2001,22(4):300-304. 被引量:19
  • 5范锦彪.高g值加速度溯源性校准理论及高冲击测试技术研究[D].太原:中北大学,2010.
  • 6Wang Y, Fan J B, Xu P, et al. Shock Calibration of the High-g Tri- axial Accelerometer[ A]. 2008 IEEE Instrumentation and Measure- ment Technology Conference Proceedings [ C ]//Victoria, BC, Canada, May 12-15,2008,2:671-674.
  • 7赵晓东,裴东兴,范锦彪.高g值加速度计激光干涉校准及信号解算方法[J].传感技术学报,2009,22(11):1602-1605. 被引量:9
  • 8景鹏,马铁华,王燕.一种压阻式三轴高g值加速度传感器的冲击校准[J].传感技术学报,2008,21(6):954-958. 被引量:12
  • 9李庆丰,徐鹏,范锦彪.加速度计冲击校准中激励加速度脉宽的分析[J].中北大学学报(自然科学版),2007,28(z2):275-277.
  • 10康凤霞,祖静,王燕.高g值加速度传感器的激光干涉法频域响应校准技术研究[J].测试技术学报,2007,21(z),180-183.

二级参考文献30

  • 1李玉龙,郭伟国,贾德新,徐绯.高g值加速度传感器校准系统的研究[J].爆炸与冲击,1997,17(1):90-96. 被引量:45
  • 2Booker P. M. ,Cargile J. D. ,Kistler B. L. ,et al. Investigation on the Response of Segmented Concrete Targets to Projectile Impacts[J].International Journal of Impact Engineering, 2009, V36 : 926-939.
  • 3Zhang W. D. ,Chen L. J. ,Xiong J. J. ,et al. Ultra-High g Deceleration-Time Measurement for the Penetration Into Steel Target[J]. International Journal of Impact Engineering, 2007, V34:436-447.
  • 4Frew D. J. ,Forrestal M. J. ,Cargile J. D. The Effect of Concrete Target Diameter on Projectile Deceleration and Penetra tion Depth[J].International Journal of Impact Engineering, 2006, V32:1584-1594.
  • 5Knapp J. , Altmann E. , Niemann J. , et al. Measurement of Shock Events by Means of Strain Gauges and Aeeelerometers [J]. Measurement, 1998, V24 : 87-96.
  • 6Forrestal M. J. , Togami T. C. , Baker W. E. , et al. Perform ance Evaluation of Accelerometers used for Penetration Experiments[J]. Experimental Mechanics, 2003, V43 : 90-96.
  • 7Ueda K, Umeda . Alnvestigation of Accelerometers ' Frequency Response using Novel NRLM Method. Proc. 7th Int. Conf. Solid-State Sensors and Actuators(Transducers' 93), Yokohama,Japan, 7-10 June, 1993, pp. 848-851.
  • 8Kazunaga Ueda, Akira Umeda. Improvement of Novel NRLM Method for Accelerometer Characterization to the Range 10^2ms^-2[J]. Sensors and Actuators A, 1996, V54 : 517-522.
  • 9Li Bin.Study on the Measurement of in(plane Displacement of Solid Surfaces by Laser Doppler Velocimetory[J].Opt.Laser Techn,1995,27(2):89-93.
  • 10ISO/5347-21:Shock Calibration Using Laser Doppler Velocimeter,1996.

共引文献54

同被引文献102

引证文献15

二级引证文献47

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部