摘要
采用氨丙基三乙氧基硅烷(APTES)和巯丙基三乙氧基硅烷(MPTES)对腈纶(PAN)纤维进行改性,在其表面形成一种具有活性的自组装膜,该膜在化学镀银时可使银粒子定向沉积到纤维表面,无需粗化、敏化、活化等工艺。探讨了硝酸银浓度、葡萄糖用量、化学镀温度和时间对化学镀银沉积速率及电阻的影响,获得了较佳的工艺条件:硝酸银25g/L,葡萄糖50g/L,温度45°C,时间50min。采用扫描电镜(SEM)、X射线衍射(XRD)、能谱分析(EDS)等方法分别表征了改性前后腈纶纤维及改性后腈纶纤维化学镀银的表面形貌、晶体结构和元素组成,测试了改性纤维化学镀银后的耐蚀性能。结果表明,改性后的腈纶纤维在较佳条件下获得的银镀层均匀致密,电阻<1/cm,在0.1mol/LHCl和NaOH以及30g/LNaCl溶液中浸泡24h后电阻变化较小,具有较好的耐腐蚀性能。
A self-assembled active film was formed on surface of polyacrylonitrile fiber （PAN） by modification with aminopropyltriethoxysilane （APTES） and mercapto- propyltrimethoxysilane （MPTES）, making possible the directional deposition of silver particles on the surface of PAN fiber without roughening, sensitizing, and activating processes prior to electroless silver plating. The influence of AgNO3 concentration, glucose dosage, temperature, and time on deposition rate and electrical resistance of electroless- plated silver coating was discussed. The optimal process conditions were determined as follows： AgNO3 25 g/L, glucose 50 g/L, temperature 45 ℃, and time 50 min. The surface morphology, crystal structure, and elemental composition of PAN fiber before and after modification and the electroless silver plated PAN fiber after modification were characterized by scanning electron microscopy （SEM）, X-ray diffraction （XRD）, and energy-disperse spectroscopy（EDS）, respectively. The corrosion resistance of the electroless silver plated PAN fiber was tested. The results indicated that the silver coating obtained on modified PAN fiber under the given conditions features uniformity, compactness, and electrical resistance 〈1 Ω/cm. The electrical resistance of silver coating is slightly changed after immersion in 0.1 mol/L HC1 and NaOH, and 30 g/L NaC1 solutions for 24 h, presenting a good corrosion resistance.
出处
《电镀与涂饰》
CAS
CSCD
北大核心
2012年第12期20-24,共5页
Electroplating & Finishing
关键词
腈纶纤维
硅烷
自组装
化学镀银
沉积速率
耐蚀性
polyacrylonitrile fiber
silane
self-assembly
electroless silver plating
deposition rate
corrosion resistance
