摘要
Substrate straining test was carried out to study the buckling pattern of TiO2 nanotube film. The results show that the tensile strains of buckling occurrence of TiO2 nanotube films without annealing, with 250 ℃ annealing and with 400 ℃ annealing are 2.5%, 8.9% and 7.8%, respectively, which indicates the modifying effects of temperature annealing. Through the SEM observation, the critical buckling stresses of TiO2 nanotube films without annealing, with 250 ℃ annealing and with 400 ℃ annealing can be estimated as 180.4, 410.2 and 619.5 MPa, respectively. The critical buckling stress of TiO2 nanotube films with 250 ℃ annealing from AFM observation is estimated as 470.2 MPa, which indicates good agreement with the critical buckling stress from SEM observation. The true stress and the critical energy release rate of TiO2 nanotube film with 250 ℃ annealing are given as 840.3 MPa and 77.2 J/m2, respectively. Excellent agreement of the critical energy release rate of TiO2 nanotube film with 250 ℃ annealing in terms of buckling perspective and crack perspective is obtained.
采用基体应变测试方法研究TiO2纳米管薄膜的屈曲图样。结果表明:TiO2纳米管薄膜室温样、250℃退火样和 400℃退火样的屈曲应变依次为2.5%、8.9%和7.8%,说明退火改善了纳米管薄膜/Ti 基体界面状况。从 SEM 观察可以看出,TiO2纳米管薄膜室温样、250℃退火样和400℃退火样的临界屈曲应力分别为180.4、410.2 和 619.5MPa;从 AFM 观察可以看出,TiO2纳米管薄膜 250℃退火样的临界屈曲应力为470.2MPa,两者吻合得很好。采用AFM计算250℃退火样的真实应力和能量释放率分别为840.3MPa和77.2J/m2,此结果与从裂纹角度计算出的250℃退火样的能量释放率102.6 J/m2吻合得很好。
基金
Project (51274248) supported by the National Natural Science Foundation of China
Project (20110946Z) supported by State Key Laboratory of Powder Metallurgy, China
