期刊文献+

以RF/SiO_2复合气凝胶为前驱体制备介孔α-SiC 被引量:4

Preparation of Mesoporous α-SiC from RF/SiO_2 Composite Aerogels
在线阅读 下载PDF
导出
摘要 以间苯二酚(R)和甲醛(F)为碳源,3-氨丙基三乙氧基硅烷为硅源,无水乙醇为溶剂,利用简捷的一步溶胶-凝胶法和超临界干燥工艺制备RF/SiO2复合气凝胶。RF/SiO2复合气凝胶经碳热还原、煅烧、酸洗等一系列工艺制备出介孔碳化硅(SiC),采用XRD、FTIR、NMR、SEM、TEM和氮气吸附-脱附等分析手段对制备的介孔SiC进行了表征。结果表明,介孔SiC材料为纯的α-SiC,平均晶粒大小为15 nm,BET比表面积为106 m2·g-1,孔径主要分布在21.7 nm和61 nm附近,SiC纳米颗粒大小和分布均匀。 RF/SiO2 gels were synthesized in one pot by simply mixing of the monomers, and then dried to aerogels by supercritieal CO2 fluid drying. Mesoporous silicon carbide (SIC) was formed from the RF/SiO2 composite aerogels after heat treatment (carbothermal reaction at 1 500 ℃ for 3 h under Ar and air calcination at 550 ℃ for 3 h) and purifying (acid-washing, filtering, drying). XRD, FTIR, NMR, SEM, TEM and nitrogen adsorption/desorption porosimetry were used to characterize the as-prepared mesoporous SiC, The results indicate that the resulting SiC was pure α-SiC, the average erystallite size was approximately 15 nm. The mesoporous SiC specimen possessed a BET surface area of 106 m2.g-1 which approached to the specific surface area of porous SiC or SiC nanoparticles reported in other papers, a narrow pore size distribution, and a fairly uniform size and array. These mesoporous SiC could possibly be used as thermal insulators, catalysts, adsorbents or electrode materials.
出处 《无机化学学报》 SCIE CAS CSCD 北大核心 2012年第10期2071-2076,共6页 Chinese Journal of Inorganic Chemistry
基金 国家安全重大基础研究(国防973)(No.613120020020202) 江苏省高校优势学科建设工程项目(PAPD) 江苏省普通高校研究生科研创新计划(CXLX11_0343)资助项目
关键词 介孔碳化硅 溶胶-凝胶 超临界干燥 碳热还原 mesoporous silicon carbide sol-gel supercritical drying carbothermal reduction
  • 相关文献

参考文献40

  • 1Leventis N, Sadekar A, Chandrasekaran N, et al. Chem. Mater., 2010,22(9):2790-2803.
  • 2WANGYu-Xia(王玉霞),HEHai.Ping(何海平),TANGHong-Gao(汤洪高).J. Chinese Ceratn. Soc. (Guisuanyan Xuebao), 2002,30(3):372-381.
  • 3Chen K, Bao Z H, Du A, et al. Microporous Mesoporous Mater., 2012,149(1):16-24.
  • 4WANGDong-Hua(王冬华),JINGuo-Qiang(靳国强),GUOXiang-Yun(郭向云).Chinese J. Inorg. Chem. (Wuji Huaxue Xuebao), 2009,25(5):794-798.
  • 5LINJian-Xino(林建新),ZHENGY0ng(郑勇),ZHENGYing(郑瑛), et al. Chinese J. Inorg. Chem.(Wuji Huaxue Xuebao), 2006,22(10):1778-1782.
  • 6Li Y, Dorozhkin P S, Bando Y, et al. Adv. Mater., 2005,17 (5):545-548.
  • 7TANGHan.Lin(唐汉玲),ZENGXie-Rong(曾燮榕),XIONGXin-Bo(熊信柏),etal.J.Inorg.Mater.(Wuji Cailiao Xuebao),2009,24(2):305-309.
  • 8Keller N, Keller V, Barraud E, et al. J. Mater. Chem., 2004, 14(12): 1887-1895.
  • 9Feng X L, Matheny M H, Zonnan C A, et al. Nano Lett., 2010,10(8):2891-2896.
  • 10Eddy C R, Gaskill D K. Science, 2009,324(5933):1398- 1400.

同被引文献41

  • 1秦国彤,李运红,魏微,郭树才.炭气凝胶结构的形成和控制[J].化工新型材料,2006,34(3):33-35. 被引量:4
  • 2石振海,李克智,李贺军,田卓.航天器热防护材料研究现状与发展趋势[J].材料导报,2007,21(8):15-18. 被引量:20
  • 3Pérez-Caballero F, Peikolainen A L, Uibu M, et al. Micropor.Mesopor. Mater., 2008,108(1):230-236.
  • 4Gorle B S K, Smirnova I, Dragan M, et al. J. Supercrit. Fluids, 2008,44:78-84.
  • 5Cui S, Cheng W W, Shen X D, et al. Energy Environ. Sci., 2011,4(6):2070-2074.
  • 6Zhong Y, Kong Y, Shen X, et al. Micropor. Mesopor. Mater.,2013,172:182-189.
  • 7YANG Jie(杨杰), LI Shu-Kui(李树奎), WANG Fu-Chi (王富耻), et al. 北京工业大学学报, 2010,30(6):746-756.
  • 8ZHANG He-Xin(张贺新), HE Xiao-Dong(赫晓东), LI Yao (李垚). 稀有金属材料工程, 2007,36 (1):567-569.
  • 9Skaltsas T, Avgouropoulos G, Tasis D. Micropor. Mesopor. Mater., 2011,143(2):451-457.
  • 10Kong Y, Zhong Y, Shen X D, et al. Non-Cryst. Solids, 2012, 358(23):3150-3155.

引证文献4

二级引证文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部