Utilization of Hydrocarbons Obtained by Waste Plastic Pyrolysis： Application for Additive Production （Part Ⅱ）
Utilization of Hydrocarbons Obtained by Waste Plastic Pyrolysis： Application for Additive Production （Part Ⅱ）
摘要
New route of the utilization of products obtained by waste plastic pyrolysis has been investigated. ct-olefin-succinic-anhydride intermediate based on new experimental additives has been developed and used for achieving the better properties of carbon fibre reinforced polymer composites. Hydrocarbon fractions were produced by the pure thermal pyrolysis of waste polymers in a tube reactor using 550 ℃ in the absence of oxygen. Selected compounds （C30-C50） from pyrolysis products have been used as raw materials in the additive synthesis step. Polymer composite specimens have been investigated among others by universal tensile machine, SEM （scanning electron microscopy） and FTIR （fourier transformed infrared spectroscopy） methods. The tensile strength could be increased by 29.9%, the E-modulus by 24.2% and the Charpy impact strength by 13.3% in the presence of the experimental additive. Fibre-matrix interaction has been studied on SEM micrographs of the fractured face of composites. The results of mechanical testes have been supported by the SEM micrographs and possible shames of the coupling have been proposed.
二级参考文献20
-
1R. Aguado, M. Olazar, B. Gaisfin, R. Prieto, J. Bilbao,Kinetics of polystyrene pyrolysis in a conical spouted bed reactor, Chemical Engineering Journal 92 (2003) 91-99.
-
2S.M. A1-Salem, P. Lettieri, J. Baeyens, Recycling and recovery routes of plastic solid waste (PSW): A review, Waste Management 63 (2009) 4-7.
-
3T. Moriya, H. Enomoto, Characteristics of polyethylene cracking in supercritical water compared to thermal cracking, Polymer Degradation and Stability 65 (1999) 373-386.
-
4K. Murata, Y. Hirano, Y. Sakata, M.A. Uddin, Basic study on a continuous flow reactor for thermal degradation of polymers, Journal of Analytical and Applied Pyrolysis 65 (2002) 71-90.
-
5A. Karaduman, E.H. Simsek, B. Cicek, A.Y. Bilgesu, Thermal degradation of polystyrene wastes in various solvents, Journal of Analytical and Applied Pyrolysis 62 (2002) 273-280.
-
6W. Kaminsky, B. Schlesselmann, C.M. Simon, Thermal degradation of mixed plastic waste to aromatics and gas, Polymer Degradation and Stability 53 (1996) 189-197.
-
7J. Aguado, D.P. Serrano, Feedstock Recycling of Plastic Wastes, Royal Society of Chemistry, Cambridge, 1999.
-
8A. Marcilla, A. G6mez, J.A. Reyes-Labarta, A. Giner, F. Hern tndez, Kinetic study of polypropylene pyrolysis using ZSM-5 and an equilibrium fluid catalytic cracking catalyst, Journal of Analytical and Applied Pyrolysis 68-69 (2003) 467-480.
-
9H. Bockhorn, A. Hornung, U. Hornung, Mechanism and kinetics of thermal decomposition of plastics from isothermal and dynamic measurements, Journal of Analytical and Applied Pyrolysis 50 (1999) 77-101.
-
10F.J. Mastral, E. Esperanza, C. Berrueco, M. Juste, J. Ceamanos, Fluidized bed thermal degradation products of HDPE in an inert atmosphere and in air-nitrogen mixture, Joumal of Analytical and Applied Pyrolysis 70 (2003) 1-17.
-
1丁权.热塑性复材管道:油气行业的更佳解决方案[J].玻璃纤维,2013(2):46-48.
-
2任耀剑,孙智.聚合物/煤复合材料的研究进展[J].工程塑料应用,2009,37(1):84-87. 被引量：4
-
3专利技术[J].化工进展,2007,26(12):1812-1812.
-
4孙占宁,陆爱红,郑保山.胶粘剂[J].精细石油化工文摘,1998(4):70-78.
-
5化岩,史永刚,梁俊,任连岭,梅林.傅立叶变换红外光谱快速测定润滑油碱值[J].润滑与密封,2008(9).
-
6Norbert Miskolczi Laszlo Bartha.Utilization of Hydrocarbons Obtained by Waste Plastic Pyrolysis： Energetic Utilization （Part Ⅰ）[J].Journal of Energy and Power Engineering,2012,6(8):1204-1210. 被引量：1
-
7一种以合成气为原料两段法制备低碳烯烃的方法[J].国内外石油化工快报,2008(11):30-30.
-
8M. Sarker M.M. Rashid M. Molla.Waste Plastic Conversion into Hydrocarbon Fuel like Low Sulfur Diesel[J].Journal of Environmental Science and Engineering,2011,5(4):446-452.
-
9可使道路自动除冰的盐-聚合物复合材料[J].石油化工,2016,45(5):588-588.
-
10W. Brüchle,E. Jger,D. Nayak,E. Schimpf,B. Schausten,M. Schdel.Development of a Separation Scheme to Search for ^(239)Cm Part Ⅱ: Cm separation modeled with lanthanide radiotracers[J].近代物理研究所和兰州重离子加速器实验室年报：英文版,2004(1):55-56.
