期刊文献+

不同基体平面压痕应力强度因子 被引量:1

Stress Intensity Factor for Different Panel Under Indentations
在线阅读 下载PDF
导出
摘要 基于经典守恒积分方法对刚性压头冲压平板情况下应力强度因子(SIF)进行数值分析,应有有限元软件模拟冲压形成的奇异应力场,并计算应力强度因子。比较了几组具有不同弹性模量和泊松比的应力强度因子,研究其与断裂韧性之间关系得出变化规律。工程中可利用奇异应力场数值分析结果研究材料的破坏行为、测试材料的机械性能。 Numerical analysis of the stress intensity factor(SIF) induced by indentations was proposed based on the conservation integral.Simulation of the intensification of the stress fields by software of finite element method.The stress intensity factor for such stress fields was calculated.The SIF with different elastic modulus and poisson ratio was compared,focused on the relation between SIF and fracture toughness,and investigated the change law.Use the numerical result to researching damage behavior of material and testing the mechanical properties in engineering.
出处 《石油化工高等学校学报》 CAS 2012年第4期77-80,共4页 Journal of Petrochemical Universities
基金 国家自然科学基金(50771052 50971068) 辽宁省自然基金项目(20082188) 辽宁省教育厅重点实验室项目(LS2010100)
关键词 断裂 冲压 应力强度因子 弹性模量 数值分析 Fracture; Indentation; Stress intensity factor; Elastic modulus; Numerical analysis
  • 相关文献

参考文献11

  • 1Xie Y J, Hills D A. Crack initiation at contact surface[J]. Theoretical and applied fracture mechanics, 2003,40(3 ) :279- 283.
  • 2Xie Y J, Hills D A. Quasibrittle fracture beneath a flat bearing surface[J]. Engineering fracture mechanics, 2008,75 (5): 1223-1230.
  • 3Porter M I, Hills D A. Adhesive contact between a rigid punch and a half plane via a thinsoft interlayer[J]. J. eng. mech. ,2001,127:176-179.
  • 4Hills D A,Porter M I. A flat punch pressed against an elastic interlayer under conditions of slip and separation[J]. Int. j. mech. sci. ,2002,44:465-474.
  • 5Nadai A I. Theory of flow and fracture of solids[M]. New York.. McGraw-Hill, 1963.
  • 6Johnson K I.. Contact mechanics[M]. Cambridge : Cambridge university press, 1985.
  • 7Sih G C. Dynamic aspects of crack aspects of crack propagation[M]//Inelastic behavior of solids. New York: Mc Graw --hill book,Co. ,1969:607-639.
  • 8王晓华,蔡永梅,谢禹钧.平板双侧触压的应力强度因子[J].工程力学,2009,26(3):6-8. 被引量:4
  • 9王伟,谢禹钧.Ⅰ型类中央双裂纹椭圆形截面管环向裂纹应力强度因子[J].辽宁石油化工大学学报,2010,30(3):55-57. 被引量:3
  • 10王晓华,马英利,孙壮,谢禹钧.周期阵列压痕奇异应力场与开裂(Part Ⅱ:压痕开裂临界载荷)[J].石油化工高等学校学报,2009,22(2):63-65. 被引量:1

二级参考文献31

共引文献5

同被引文献11

  • 1Clark A B, Irwin G R. Crack-propagation behaviours[J]. Experimental Mechanics, 1966, 6:321-330.
  • 2Cotterell B, Rice J R. Slightly curved or kinked cracks[J]. International Journal of Fracture, 1980, 16:155-169.
  • 3Budiansky B, Rice J R. Conservation laws and energy-release rates[J]. Journal of Applied Mechanics, 1973, 40:201-203.
  • 4Sumi Y, Nemat-Nasser. On crack path stability in a finite body[J]. Engineering Fracture Mechanics, 1985, 22:759-771.
  • 5Zeng R, Wang M O. Branching extension characteristics of mode-II crack under fatigue loading[J]. Engineering Fracture Mechanics, 1994, 49: 487-498.
  • 6Xu X P. Numerical simulations of fast crack growth in brittle solids[J]. Journal of the Mechanics and Physics of Solids, 1994, 42:1397-1434.
  • 7Xie Y J, Cai Y M. Applications of conservation integral to indentation with a rigid punch[J]. Engineering Fracture Mechanics, 2009, 76:949-957.
  • 8Xie Y J, Wang X H. Stress intensity factors for cracked homogeneous and composite multi-channel beams[J]. International Journal of Solids and Structures, 2007, 44:4830-4844.
  • 9Xie Y J. An analytical method on circumferential periodic cracked pipes and shells[J]. International Journal of Solids and Structures, 2000, 37..5189-5201.
  • 10王晓华,蔡永梅,谢禹钧.平板双侧触压的应力强度因子[J].工程力学,2009,26(3):6-8. 被引量:4

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部