摘要
（Fe50Co25B15Si10）80Cu20 ribbons are prepared by using the single-roller melt-spinning method. A dual-layer structure consisting of a （Fe, Co）-rich amorphous phase and a Cu-rich crystalline phase forms due to metastable liquid phase separation before solidification. The magnetic hysteresis loops of the as-quenched and annealed samples are measured at room temperature. It is indicated that the coercivity of the ribbon is almost zero in the as-quenched state. The crystallization leads to the increase of coercivity and decrease of saturation magnetization.
（Fe50Co25B15Si10）80Cu20 ribbons are prepared by using the single-roller melt-spinning method. A dual-layer structure consisting of a （Fe, Co）-rich amorphous phase and a Cu-rich crystalline phase forms due to metastable liquid phase separation before solidification. The magnetic hysteresis loops of the as-quenched and annealed samples are measured at room temperature. It is indicated that the coercivity of the ribbon is almost zero in the as-quenched state. The crystallization leads to the increase of coercivity and decrease of saturation magnetization.
基金
Project supported by the National Natural Science Foundation of China (Grant Nos. 51171152 and 50871088)
the Foundation for Fundamental Research of Northwestern Polytechnic University,China (Grant No. JC201268)
the Fund of the State Key Laboratory of Solidification Processing,China (Grant No. SKLSP201202)
