摘要
建立了多层串联PZT95/5爆电换能组件3维数值模型,对固化封装条件下陶瓷介质击穿问题进行了计算分析,计算结果表明:在不改动器件外部结构尺寸条件下,采用等厚度PZT95/5叠片结构布局对进一步提高输出电压方面存在瓶颈。为克服上述影响以及降低爆电换能组件击穿概率,提出了PZT95/5铁电陶瓷非等厚度布局解决方案。为实现上述设想,通过引入不等式约束条件计算得到一组非等厚度优化布局,将爆电换能组件所用PZT95/5铁电陶瓷数量减至19片,同时有效实现该布局下,各片PZT95/5陶瓷电压均低于对应厚度击穿电压的优化目标。
The lead zirconate titanate PbZr0.95Ti0.05O3（PZT95/5） ferroelectric ceramics are generally used in the explosive-electric transducer,as multilayer PZT95/5 thin films arrangement to realize high voltage output.However,the dielectric breakdown of the ceramics needs to be taken seriously.A quasi-static electric field model has been developed for voltage distribution analysis of multilayer PZT95/5 ceramics compressed by shock wave in the normal mode.The calculation results reveal that the electric potential difference of PZT95/5 films increases nonlinearly from ground electrode to output electrode.Since the thickness of ceramic materials has an effect upon dielectric strength,it is a suitable way to avoid device dielectric breakdown by designing carefully the nonuniform layout of PZT95/5 thin films.By using inequality restriction,an nonuniform layout optimization of PZT95/5 films arrangement is obtained,which reduces the layer number to 19 and makes the voltage of each layer of PZT95/5 element being lower than its breakdown voltage.
出处
《强激光与粒子束》
EI
CAS
CSCD
北大核心
2012年第3期567-570,共4页
High Power Laser and Particle Beams
基金
中国工程物理研究院科学技术发展基金项目(2010B0402052)
关键词
铁电陶瓷
爆电换能
介电击穿
数值优化
ferroelectric ceramic
explosive-electric transducer
dielectric breakdown
numerical optimization
