期刊文献+

赛黑桦的构造特征和物理力学性质 被引量:7

Structural Features and Properties of Betula schmidtii Entitled as Rigidy and Heavy Wood
在线阅读 下载PDF
导出
摘要 赛黑桦(Betula schmidtii),又称辽东桦,散孔材;木质厚重、坚硬,传统上用来制作车轴、木锤、擀面杖、算盘珠等(戚继忠等,2009;Akcehob et al.,2006),主要生长在我国东北东部与朝鲜接壤地区,与该地区相邻的朝鲜南部和俄罗斯南部海滨一带(锡霍特山脉南端)亦有分布,成年立木高约20m,树干直径约70cm,寿命约300-350年(Nechaeva,1972;RedBookoftheUSSR,1984;Korkishko,1992)。 The observation and analysis have been operated about the structural features of Betula schmidtii by those instruments biomicroscope and ESEM.Result showed that iron birch belonged to diffuse-porous wood,structure was even and smooth,the zone of demarcation of growth increments were visible,the color was greatly different during heartwood and sapwood,and pores were visible by naked eye.Pore arrangement involved solitary one and multiple one,pore cluster was slim,multiple pore were usually ribbon-like aggregations of 2,3 or 4 cells extending in the radial direction,intervessel pit was the type of alternate,perforation plates was that of scalariform,rays amount was from 1 to 5,and longitudinal parenchyma was thin.The physical nature and mechanical properties of Betula schmidtii have been testde,analysed and studyed contrastively with other kinds of wood.The results showed that the basic density of iron birch was 0.747 g·cm-3,air-dry density was 0.904 g·cm-3,and oven dry density was 0.875 g·cm-3.The shrinkage coefficient of radial direction in the state of air-dry was 0.12%,the tangential one was 0.20%,and the volume one was 0.38%.The coefficient of radial shrinkage in the state of oven dry was 0.23%,the tangential one was 0.28%,and the volume one was 0.53%.The bending strength of tangential direction was 233.32 MPa,the modulus of elasticity of bending strength was 17.87GPa,the shear stresses at right parallel to the grain in the radial surfaces was 16.32 MPa,the tangential one was 16.40 MPa.The crushing strength at right parallel to the grain was 89.88 MPa.the strength of toughness was 153.71 kJ·mm-2.The strength of rigidity in the radial section was 8 042.22 N,the tangential was 7 794.17 N,and the cross one was 8 778.85 N.
出处 《林业科学》 EI CAS CSCD 北大核心 2012年第2期180-186,共7页 Scientia Silvae Sinicae
基金 吉林省科技发展计划项目(20070704) 国家林业公益性行业科研专项(201004095) 吉林省教育厅项目(2012-160)
关键词 赛黑桦 辽东桦 构造特征 木材性质 Betula schmidtii iron birch structural features of wood properties of wood
  • 相关文献

参考文献6

  • 1火树华.1992树木学.北京:中国林业出版社,227-232.
  • 2戚继忠,孙耀星,张立平.铁桦树树种与资源分布的考证[J].南京林业大学学报(自然科学版),2009,33(6):132-134. 被引量:4
  • 3申宗圻.木材学[M].北京:中国林业出版社,1990..
  • 4Korkishko R. 1992. Rare vascular plant species of kedrovaya padj preserve : recent state of flora and fauna of kedrovaya padj preserve. Vladivostok: Far East Branch, Russian Academy of Sciences, Institute of Biology and Soil Science.
  • 5Nechaeva T. 1972. Summary of flora from kedrovaya padj preserve: flora and vegetation of kedrovay a padj preserve. Vladivostok: Far East Science Center, USSR Academy of Sciences, Institute of Biology and Soil Science.
  • 6Red Book of the USSR. 1984. Rare and endangered animal and plant species (second edition ). Moscow: Lesnaya promyshlennostj (Lumber In dustry).

二级参考文献9

共引文献10

同被引文献67

  • 1蔡桁,蒋祥娥,汪建亚,丁小飞,郝汉芳,户田忠雄,锦织正智.鹅掌楸组织培养技术研究[J].安徽农业科学,2005,33(4):624-626. 被引量:14
  • 2陈潇俐,潘彪.红木类木材表面材色和光泽度的分布特征[J].林业科技开发,2006,20(2):29-32. 被引量:22
  • 3陈伟.光皮桦天然群体遗传多样性研究[J].北京林业大学学报,2006,28(6):28-34. 被引量:14
  • 4瓦逊,罗德,包志毅.世界园林乔灌木[M].北京:中国林业出版社.2004.
  • 5杨少春,王克奇,戴天虹,白雪冰.基于L^*a^*b颜色空间对木材分类的研究[J].林业机械与木工设备,2007,35(10):28-30. 被引量:24
  • 6农业部科技发展中心.植物新品种特异性、一致性和稳定性测试指南总则(GB/T19557.1-2004)[S].北京:中国标准出版社,2004:5.
  • 7林大为,姚红军,周建仁,等.植物新品种特异性、一致性、稳定性测试指南一品红(LY/T1850-2009)[S].北京:中国标准出版社,2009.
  • 8施士争,周建仁,黄发吉,等.植物新品种特异性、一致性、稳定性测试指南柳属(GB/T26910-2011)[s].北京:中国标准出版社,2011.
  • 9裴东,张俊佩,周建仁,等.植物新品种特异性、一致性、稳定性测试指南核桃属(GB/T2696-2011)[s].北京:中国标准出版社,2011.
  • 10《中国植物志》编辑委员会.中国植物志:第21卷[M].北京:科学出版社,1979:103-138.

引证文献7

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部