期刊文献+

超声波检测拉伸PVC-U的取向度 被引量:1

Research in Measurement of Molecular Orientation of PVC Stretched by Ultrasonic
在线阅读 下载PDF
导出
摘要 采用超声波方法对不同拉伸倍率的硬聚氯乙烯(PVC-U)样品垂直于其拉伸方向进行测试得到超声波速度,并通过红外二向色性的方法测试样品得到红外二向色性比。利用红外二向色性比对超声波速度进行标定,进而得到红外二向色性比与超声波速度的关系。经过测试表明,超声波速度与红外二向色性比可建立起关系,并且随着拉伸倍率的提高,样品的超声波速度逐渐减小,红外二向色性比逐渐增大。最终使得利用超声波方法进行在线取向度检测成为可能。 Ultrasonic has been used for measuring the sample with different ratio of stretching from the perpendicular direction of the stretching,and the velocity of ultrasonic was received.Dichroic ratio was given by microscopic infrared spectrum. Velocity of ultrasonic marked by the dichroic ratio,as follow the relationship between velocity of ultrasonic and dichroic ratio was founded.The result shows the increase of the stretching ratio reduces velocity of ultrasonic,and the dichroic ratio gradually ascends.Finally the possibility of measuring the orientation of the pipe by ultrasonic in-line could be realized.
出处 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2012年第4期101-105,共5页 Polymer Materials Science & Engineering
基金 高等学校博士学科点专项科研基金资助(20100010110007)
关键词 超声波 红外二向色性 取向度 硬聚氯乙烯 ultrasonic dichroic ratio orientation PVC-U
  • 相关文献

参考文献6

  • 1李健,黄庆,李鑫,袁晓燕.乙交酯-L-丙交酯共聚物纤维非晶区取向的声速法表征[J].纺织学报,2007,28(11):9-12. 被引量:3
  • 2Gillbert M,Ross D H,Kim H C.X-ray pole figures to assess orienta-tion in PVC sheets[].Journal of Applied Polymer Science.2007
  • 3He B B,Yuan X,Yang H,et al.Ultrasonic measurement of orien-tation in HDPE/iPP blends obtained by dynamic packing injectionmolding[].Polymer.2006
  • 4Marco Y,Chevalier L,Chaouche M.WAXD study of induced crystallization and orientation in poly(ethylene terephthalate) during biaxial elongation[].Polymer.2002
  • 5P. Schmidt J. Kolak F. Lednick J. Dybal J. M. Lagarnb.Phase structure, composition and orientation of PC/PSAN blends studied by Raman spectroscopy, confocal Raman imaging spectroscopy and polarised PA-FTIR spectroscopy[].Polymer.2000
  • 6Coates,P D,Barnes,S E,Sibley,M G,Brown,E C.In-process Vibrational Spectroscopy and Ultrasound Measurements in Polymer Melt Extrusion[].Polymer.2003

二级参考文献11

  • 1徐纪刚,陈功林.医用生物材料——聚乙丙交酯PGLA(90/10)聚合过程的研究[J].纺织科学研究,2005,16(3):1-6. 被引量:4
  • 2李健,袁晓燕.合成可吸收缝合线的研究进展[J].天津工业大学学报,2006,25(1):18-21. 被引量:14
  • 3塞缪尔斯 R J.结晶高聚物的性质[M].北京:科学出版社,1984:19-24.
  • 4Gilding D K,Reed A M.Biedegradable polymers for use in surgery-polyglycolic/poly (actic acid)homo-and copolymem:1[J].Polymer,1979,20:1459-1464.
  • 5普里瓦尔科 B Ⅱ.聚合物物理化学手册:第2卷[M].北京:中国石化出版社,1995:210.
  • 6Loo J S C,Ooi C P,Tan M L,et al.Isothermal annealing of pdy(lactide-co-glycolide)(PLGA)and its effect on radiation degradation[J].Polymer International,2005,54:636-643.
  • 7Tadokoro H.Structure of Crystalline Polymers[M].New York:Wiley-Interscience,1979:367.
  • 8Lichun L,Mikos A G,Mark J E,et al.Polymer Data Handbook[M].Oxford:Oxford University Press,1999:566-569.
  • 9Okuzaki H,Kuhota I,Kunugi T.Mechanical properties and structure of the zone-drawn poly(L-lactic acid)fibers[J].Journal of Polymer Science:Part B:Polymer Physlcs.1999,37:991-996.
  • 10李鑫,李瑞霞,吴大诚,孙琳,宋青,国凤敏,吴立衡.涤纶工业丝等温收缩中的结构变化[J].高分子学报,2001,11(1):84-89. 被引量:11

共引文献2

同被引文献13

  • 1KALAY G,BEVIS M J.Processing and physical property relationships in injection-molded isotactic polypropylene.1.Mechanical properties[J].J Polym Sci,1997,35 (2):241-263.
  • 2de FRANCESCO A,DUCKETT R A.Effects of orientation on mechanical properties of uniaxially oriented polystyrene films[J].Polymer,2004,45 (23):8005-8011.
  • 3WIBERG G,HILLBORG H,GEDDE U W.Assessment of development and relaxation of orientation in a sheared thermotropic liquid crystalline copolyester[J].Polym Eng Sci,1998,38 (8):1278-1285.
  • 4JANSEN J A J,VAN der MAAS J H,POSTHUMA de BOER A.Characterization of molecular orientation in polymeric products by fourier transform infrared spectroscopy using diffuse reflectance optics[J].Macromolecules,1991,24:4278-4280.
  • 5FUJIYAMA M,WAKINO T.Crystal orientation in injection molding of talc-filled polypropylene[J].J Appl Polym Sci,1991,42 (1):9-20.
  • 6董维煜.布管扩胀法成型双向自增强塑料管材的机理研究[D].北京:北京化工大学,2011.
  • 7吴大鸣,上官洲鑫,许红,等.管材的环向取向度的测试方法:中国,CN102590346A[P].2012-01-13.
  • 8上官州鑫.准动态扩张双轴取向PVC管材取向度的研究[D].北京:北京化工大学,2012.
  • 9LI J,SUN Z G,TATIBOUET J,et al.An In-process ultrasonic approach to investigating the relaxation of orientation and disorientation of polymer melts[J].Polym Eng Sci,2008,48 (5):987-994.
  • 10LIN C M,WANG S,SUN H M,et al.Real-time ultrasonic characterization of the chain orientation of high density polyethylene melts during processing[J].Polym Eng Sci,2010,50 (6):1140-1150.

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部