期刊文献+

Dynamically Adapt to Uneven Terrain Walking Control for Humanoid Robot 被引量:3

Dynamically Adapt to Uneven Terrain Walking Control for Humanoid Robot
在线阅读 下载PDF
导出
摘要 Dynamically adapt to uneven ground locomotion is a crucial ability for humanoid robots utilized in human environments.However,because of the effect of current pattern generation method,adapting to unknown rough ground is limited.Moreover,to maintain large support region by four-point contact during the landing phase is usually a key problem.In order to solve these problems,a landing phase control and online pattern generation in three dimensional environments is proposed.On the basis of robot-environment non-planar interactive modes,a method of landing control based on optimal support region is put forward to realize stable four-point contact by flexible foot,and a controller is employed to adapt to the changes of ground without using prior knowledge.Furthermore,an adaptable foothold planning is put forward to the online pattern generation considering walking speed,uneven terrain,and the effect of lateral movement to the locomotion stability.Finally,the effectiveness of landing control and online pattern generation is demonstrated by dynamic simulations and real robot walking experiments on outdoor uneven ground.The results indicate that the robot kept its balance even though the ground is unknown and irregular.The proposed methods lay a foundation for studies of humanoid robots performing tasks in complex environments. Dynamically adapt to uneven ground locomotion is a crucial ability for humanoid robots utilized in human environments.However,because of the effect of current pattern generation method,adapting to unknown rough ground is limited.Moreover,to maintain large support region by four-point contact during the landing phase is usually a key problem.In order to solve these problems,a landing phase control and online pattern generation in three dimensional environments is proposed.On the basis of robot-environment non-planar interactive modes,a method of landing control based on optimal support region is put forward to realize stable four-point contact by flexible foot,and a controller is employed to adapt to the changes of ground without using prior knowledge.Furthermore,an adaptable foothold planning is put forward to the online pattern generation considering walking speed,uneven terrain,and the effect of lateral movement to the locomotion stability.Finally,the effectiveness of landing control and online pattern generation is demonstrated by dynamic simulations and real robot walking experiments on outdoor uneven ground.The results indicate that the robot kept its balance even though the ground is unknown and irregular.The proposed methods lay a foundation for studies of humanoid robots performing tasks in complex environments.
出处 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2012年第2期214-222,共9页 中国机械工程学报(英文版)
基金 supported by National Natural Science Foundation of China (Grant No. 50775008) the PhD Programs Foundation of Ministry of Education of China (Grant No. 200800061019) Hubei provincial Digital Manufacturing Key Laboratory Foundation of China (Grant No.SZ0602)
关键词 humanoid robots landing control online gait generation uneven terrain humanoid robots landing control online gait generation uneven terrain
  • 相关文献

参考文献1

二级参考文献17

  • 1Hirose M, Haikawa Y, Takenaka T, et al Development of humanoid robot ASIMO[C]//IEEE/RSJ International Conference on Intelligent Robots and Systems. Piscataway, N J, USA: IEEE, 2001: 1321-1326.
  • 2Tanie K. Humanoid robot and its application possibility[C]// IEEE Conference on Multisensor Fusion and Integration for Intelligent Systems. Piscataway, NJ, USA: IEEE, 2003: 213-218.
  • 3Inoue H, Tachi S. Overview of humanoid robotics project of METI[C]//Intemational Symposium on Robotics. 2001: 1478- 1482.
  • 4Swinson M L, Bruemmer D J. Expanding frontiers of humanoid robotics[J]. 1EEE Intelligent Systems and Their Applications, 2000, 15(4): 12-16.
  • 5Hashimoto K, Sugahara Y, Sunazuka H, et al. Biped landing pattern modification method with nonlinear compliance control[C]//IEEE International Conference on Robotics and Automation. Piscataway, NJ, USA: IEEE, 2006: 1213-1218.
  • 6Kang T K, Song H, Kim D, et al. Environment recognition system for biped walking robot using vision based sensor fusion[M]//Lecture Notes in Computer Science, vol.4570. Berlin, Germany: Springer-Verlag, 2007: 405-414.
  • 7Kagami S, Nishiwaki K, Kuffner J, et al. Online 3D vision, motion planning and biped locomotion control coupling system of humanoid robot: H7[C]//IEEE/RSJ International Conference on Intelligent Robots and Systems. Piscataway, NJ, USA: IEEE, 2002: 2557-2562.
  • 8Chew C, Pratt J, Pratt G. Blind walking of planar bipedal robot on sloped terrain[C]//lEEE International Conference on Robotics and Automation. Piscataway, NJ, USA: IEEE, 1999: 122-127.
  • 9Morisawa M, Tsuji T, Nishioka Y, et al. Contact motion in unknown environment[C]//IEEE International Conference on Robotics and Automation. Piscataway, NJ, USA: IEEE, 2003: 992-996.
  • 10Wang J, Sheng T, Ma H X, et al. Design and dynamic walking control of humanoid robot Blackmann[C]//6th World Congress on Intelligent Control and Automation. Piscataway, NJ, USA: IEEE, 2006: 8848-8852.

共引文献8

同被引文献20

  • 1CHENG Gang GE Shi-rong WANG Yong.Error Analysis of Three Degree-of-Freedom Changeable Parallel Measuring Mechanism[J].Journal of China University of Mining and Technology,2007,17(1):101-104. 被引量:7
  • 2QI Ming,QIE Yanhui.FORWARD KINEMATICS ANALYSIS FOR A NOVEL 5-DOF PARALLEL MECHANISM USING TETRAHEDRON CONFIGURATIONS[J].Chinese Journal of Mechanical Engineering,2007,20(6):1-4. 被引量:3
  • 3GUI AN Q, GONZALEZ A F, MARKUS N. Constrainteffects for a reactor pressure vessel subjected topressurized thermal shockfJ]. Procedia MaterialsScience, 2014, 3(1): 1687-1693.
  • 4ILYA B, FLORIN C. Contributions to thermal constraintsmanagement in radial active distribution systems[J].Electric Power Systems Research, 2014,111(11):169-176.
  • 5KLOCKEF, LUNGD, PULS H. FEM-modelling of thethermal workpiece deformation in dry tuming[J].Procedia CIRP, 2013, 8(12): 240-245.
  • 6KAMRANA, MANOUCHEHRS, MEHDI A. Transientthermal stresses in functionally graded thick truncatedcones by graded finite element method[J]. InternationalJournal of Pressure Vessels and Piping,2014, 119(1):52-61.
  • 7LUO Zai, JIANG Wensong, GUO Bin, et al. Analysis ofseparation test for automatic brake adjuster based onlinear radon transformation[J]. Mechanical Systems andSignal Processing, 2014, 50(1): 526-534.
  • 8BI Fengrong, SHAO Kang, LIU Changwen, et al.Analysis of thermoelasto hydrodynamic performance ofjournal misaligned engine main bearings卩].ChineseJournal of Mechanical Engineering, 2015,28(3): 511-520.
  • 9JEON J, MULIANA A, SAPONARAVL. Thermal stressand deformation analyses in fiber reinforced polymercomposites undergoing heat conduction and mechanicalloading[J]. Composite Structures, 2014,5(11): 31-44.
  • 10WANG Z, GAO S,QIN P. Detection of grossmeasurement errors using the grey system method[J]. TheInternational Journal of Advanced ManufacturingTechnology, 2002, 19(11): 801-804.

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部