期刊文献+

迎风凹腔与逆向喷流组合热防护系统冷却效果研究 被引量:10

Cooling efficiency investigation of forward-facing cavity and opposing jet combinatorial thermal protection system
原文传递
导出
摘要 对迎风凹腔与逆向喷流组合热防护系统的冷却效果进行了分析,研究了相同总压不同流速的逆向喷流对组合结构的流场、气动受力及壁面传热的影响.通过与相关的实验结果对比,验证了数值方法的可靠性.研究发现:该结构能够有效地对飞行器鼻锥表面进行冷却,引入很小总压的逆向喷流(逆喷总压比PR=0.1),组合结构的冷却效果就可以远远优于单一的迎风凹腔;相同逆向喷流总压下,逆喷速度越高,逆喷流量越大,外壁面的冷却效果越好;随逆喷流速提高,气动阻力也进一步减小.本文研究的组合结构非常适用于远程、需长时间飞行的高超声速飞行器的热防护. The cooling efficiency of a forward-facing cavity and opposing jet combinatorial thermal protection system is investigated,by which the flow field parameters,the aerodynamic force,and the surface heat flux distribution are obtained.The numerical simulation method is validated by experiment with no opposing jet model.The analysis of the numerical simulation results shows that this kind of combinatorial thermal protection system has an excellent effect on cooling the outer body surface of the nose-tip.By introducing an opposing jet with a small total pressure(total pressure ratio PR is 0.1),the cooling effect of combinatorial configuration can be much better than that of a single cavity.With the opposing jet speed increasing,the cooling efficiency is improved and the aerodynamic resistance is reduced.The combinatorial system is suited for the thermal protection of hypersonic aircraft that needs a long-distance and long-time flight.
出处 《物理学报》 SCIE EI CAS CSCD 北大核心 2012年第6期372-377,共6页 Acta Physica Sinica
基金 国家自然科学基金(批准号:90916018) 高等学校博士学科点专项科研基金(批准号:200899980006)资助的课题~~
关键词 热防护系统 高超声速 迎风凹腔 逆向喷流 thermal protection system hypersonic forward-facing cavity opposing jet
  • 相关文献

参考文献6

  • 1Hayashi K,Aso S 2003 AIAA 2003-4041.
  • 2Aso S,Hayashi K,Mizoguchi M 2002 AIAA 2002-0646.
  • 3Burbank P B,Stallings R L 1959 NASA TMX-221.
  • 4Yuceil B,Dolling D S,Wilson D 1993 AIAA 1993-2742.
  • 5Silton S I,Goldstein D B 2000AIAA 2000-0204.
  • 6田婷,阎超.超声速场中的反向喷流数值模拟[J].北京航空航天大学学报,2008,34(1):9-12. 被引量:12

二级参考文献11

共引文献11

同被引文献73

引证文献10

二级引证文献128

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部