摘要
为选择合适的汽车方舱空调系统和进出风模式,运用FLUENT软件,对升温、降温和考虑辐射3种工况进行仿真计算,得到相应的舱内速度和温度分布.升温时,经过300 s舱内平均温度从243 K升到290 K;降温时,经过300 s舱内平均温度从343 K降低到302 K;降温时考虑辐射,经过264 s舱内平均温度从343 K降低到302 K.对不同进、出风模式进行仿真计算,得到制冷(热)效果较好的进、出风模式.结果表明:选择左进左出模式有利于利用方舱上层空间;选择右进右出模式有利于利用方舱下层空间;复杂进风模式的通风效果比简易进风模式优越;前出风模式比下出风模式优越.上述结论为空调选择和进出风模式确定提供了参考依据.
Simulations on three kinds of working conditions（heating,cooling and radiation） and different kinds of air-inlet and air-outlet patterns to gain the corresponding distribution of air velocity and temperature inside the shelter were done with FLUENT software.The results indicated that： the cabin average temperature rose from 243 K to 290 K after 300 s when heated;the temperature reduced from 343 K to 302 K after 300 s when cooling;the temperature reduced from 343 K to 302 K after 264 s when considering the effect of radiation during the course of cooling.The results also indicated that： the average air velocity of left-in and left-out pattern was the biggest in the upper space of shelter,while it was the biggest in the lower space of shelter by choosing the right-in and right-out pattern;ventilating effect of complicated air-inlet pattern was better than that of simple air-inlet pattern,and the front-direction removal pattern was better than the down-direction removal pattern.
出处
《哈尔滨工业大学学报》
EI
CAS
CSCD
北大核心
2012年第3期92-95,101,共5页
Journal of Harbin Institute of Technology
基金
江苏省普通高校研究生科研创新计划资助(CXLX11_0182)
关键词
汽车方舱
空调系统
进出风模式
仿真分析
辐射
car shelter
air-conditioning
air-inlet and air-outlet patterns
simulation analysis
radiation
