期刊文献+

固溶氮原子对不锈钢单轴及多轴低周疲劳特性的影响 被引量:1

THE EFFECT OF NITROGEN ATOMS ON THE CHARACTERISTIC OF LOW CYCLE FATIGUE OF STAINLESS STEELS UNDER UNIAXIAL AND MULTIAXIAL LOADING
在线阅读 下载PDF
导出
摘要 对 316L和 316LN不锈钢进行了单轴拉压及多轴非比例加载低周疲劳实验研究,分析了固溶的氮原子对单轴及多轴非比例加载低周疲劳特性及其微结构的影响,结果表明、固溶的氮原子增大了不锈钢的单轴循环软化程度及非比例循环附加强化程度.延长了不锈钢的单轴拉压低周疲劳寿命,但却缩短了不锈钢的多轴非比例加载低周疲劳寿命,固溶的氮原子对单轴及多轴低周疲劳高密度位错结构的形成具有明显的抑制作用.利用Mossbauer谱方法. The tests on low--cycle fatigue of 316L and 316LN stainless steels under uniaxial tension- compression and multiaxial nonproportional loading are made. The effect of solution nitrogen atoms on the characteristics and microstructures of low-cycle fatigue under tension-compression and multiaxial nonproportional loading is analyzed. The results show that the solution nitrogen atoms increase the degree of uniaxial cyclic softening and multiaxial nonproportional cyclic additional hardening, prolong the uniaxial tension-compression low-cycle fatigue life, however, shorten the low-cycle fatigue life of stainless steels under multiaxial nonproportional loading, and inhibit the formation of the high density dislocation structures in stainless steels under uniaxial and multiaxial low--cycle fatigue. The hypothesis of IS complexes which has not been proved so far is proved indirectly with the methods of Mossbauer spectra.
出处 《金属学报》 SCIE EI CAS CSCD 北大核心 2000年第1期37-42,共6页 Acta Metallurgica Sinica
基金 国家自然科学基金!59571035 58971068 博士后基金
关键词 固溶 氮原子 低周疲劳 微结构 不锈钢 solution nitrogen atom, low cycle fatigue, microstructure
  • 相关文献

参考文献6

二级参考文献11

  • 1何国求.材料微结构对单轴及多轴非比例加载低周疲劳特性的影响(博士学位论文)[M].西南交通大学,1995..
  • 2肖林,Metall Mater Trans A,1997年,28卷,1021页
  • 3肖林,中国钼业,1997年,21卷,30页
  • 4肖林,Acta Mater,1996年,44卷,3059页
  • 5肖林,博士学位论文,1996年
  • 6肖林,Acta Metall Sin,1995年,8卷,219页
  • 7肖林,Scr Metall Mater,1994年,30卷,175页
  • 8吕允文(译),核工程材料,1987年
  • 9何国求,博士学位论文,1995年
  • 10Chen X,Fatigue,1994年,16卷,221页

共引文献23

同被引文献10

  • 1彭建国,骆素珍,袁敏.304奥氏体不锈钢高温氧化行为研究[J].宝钢技术,2007(4):29-32. 被引量:34
  • 2Samanta S K, Mitra S K, Pal T K. Influence of welding speed on microstructure and oxidation behaviour of laser welded austenitic stainless steels [J]. ISIJ International, 2006, 46(1):100-105.
  • 3Pragncll W M, Evans H E. Chromium depletion at 2-dimensional features during the selective oxidation of a 20Cr-25Ni austenitic steel [ J ]. Oxidation of Metals, 2006, 66(3 -4) :209 -230.
  • 4Saeki 1, Saito T, Furuichi R, et al. Growth process of protective oxides formed on type 304 and 430 stainless steels at 1273K [ J ]. Corrosion Science, 1998, 40(8) :1295 - 1302.
  • 5N orling R, N ylund A. The influence of temperature on oxide-scale formation during erosion-corrosion [ J ]. Oxidation of Metal ,2005,63 (1 -2) :87 -111.
  • 6Huntz A M, Reckmann A, Haut C, et al. Oxidation of AISI 304 and AISI 439 stainless steels[ J ]. Materials Science and Engineering A, 2007, 447 (1 -2) :266-276.
  • 7Bauer R, Bacealaro M, Jeurgens L P H, et al. Oxidation behavior of Fe-25Cr-20Ni-2.8Si during isothermal oxidation at 1286K; life-time prediction [ J ]. Oxidation of Metals, 2008, 69 (3 - 4 ) :265 - 285.
  • 8Tholence F, Norell M. High temperature corrosion of cast alloys in exhaust environments( Ⅱ ) :Cast stainless steels[ J]. Oxidation of Metals, 2008, 69(1 -2) :37 -62.
  • 9YANG Wu,LI Guangfu,HUANG Chunbo,ZHOU Jianjiang,LU Zhanpeng.Stress Corrosion Cracking of Nitrogen-containing Stainless Steel 316LN in High Temperature Water Environments[J].Chinese Journal of Mechanical Engineering,2010,23(6):677-683. 被引量:10
  • 10王妙全,钱余海,齐慧滨,王炜,李明.模拟热轧工艺条件下304不锈钢的氧化行为[J].腐蚀科学与防护技术,2011,23(1):5-8. 被引量:6

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部