期刊文献+

陶瓷髋关节异响的研究进展和展望 被引量:3

Current State and Progress in the Research of Squeaking in Ceramic-on-ceramic Hip Prosthesis
原文传递
导出
摘要 分别从假体外科植入因素、假体设计因素和假体的摩擦振动因素3个方面,评述了近10年来国内外学者在陶瓷髋关节异响的产生机理及其影响因素等方面所做的研究工作和取得的进展.目前,在关节异响研究领域的主要进展是认识到髋关节植入假体的磨损和假体设计的缺陷会导致关节异响,但这些认识不能完全解释关节异响的物理现象.此外,一些学者已经注意到假体摩擦自激振动可能是关节异响的发生机理,但研究工作才刚起步.关节异响的发生机理尚不明确,许多问题还有待深入研究.为了更好地探究关节异响的发生机理,建议从摩擦自激振动与髋关节体内动力学交叉的角度来研究和分析关节异响. The research work and progress in squeaking of ceramic-on-ceramic hip prosthesis in the past ten years are reviewed from three viewpoints of surgical implantation,design of partner components and friction-induced vibration.So far,the generation mechanisms of squeaking in ceramic-on-ceramic hips are mainly attributed to the wear of implanted hips and shortcomings in prosthetic design.However,these mechanisms can not statistically explain all the physical phenomena of squeaking in ceramic-on-ceramic hips.Several investigators suggested that the squeaking of ceramic-on-ceramic hip prosthesis may be induced by the friction-induced vibration of ceramic-on-ceramic hip prosthesis,but their work has just got going.Up to now,the main mechanism of squeaking generation has not been completely understood.It is suggested that the further study on the hips squeaking should be carried out from the interdisciplines of friction-induced vibration and in vivo kinetics of hip prosthesis,so as to better acquire the understanding of the squeaking generation mechanism.
出处 《摩擦学学报》 EI CAS CSCD 北大核心 2011年第3期311-316,共6页 Tribology
基金 国家自然科学基金项目资助(50875220 50821063)~~
关键词 陶瓷 全髋置换 关节异响 摩擦振动 ceramic total hip arthroplasty squeaking friction-induced vibration
  • 相关文献

参考文献38

  • 1Boutin P. Total arthroplasty of the hip by fritted aluminum prosthesis. Experimental study and 1st clinical applications [J]. Rev Chir Orthop Reparatrice Appar Mot, 1972, 58 (3) : 229 - 246.
  • 2孙永强,王凯.全陶瓷关节在全髋关节置换中的应用[J].中国组织工程研究与临床康复,2008,12(30):5953-5956. 被引量:7
  • 3Chang J D, Kamdar R, Yoo J H, et al. Third - generation ceramic - on - ceramic bearing surfaces in revision total hip arthroplasty [ J ]. Journal of Arthroplasty,2009,24 ( 8 ) : 1 231 - 1 236.
  • 4Capello W N, A James, D'Antonio, et al. Ceramic - on - ceramic total hip arthroplasty: update [ J ]. Journal of Arthroplasty, 2008, 23(7): 39-43.
  • 5Murphy S B, Ecker T M, Tannast M. Two - to 9 - year clinical results of alumina ceramic - on - ceramic THA [ J ]. Clinical Orthopaedics and Related Research, 2006, 453 : 97 - 102.
  • 6Hamadouche M, Boutin P, Daussange J, et al. Alumina - on - alumina total hip arthroplasty :a minimum 18.5 - year follow - up study [J]. Journal of Bone and Joint Surgery,2002,84:69 - 77.
  • 7Walter W K. Australian experience with ceramic systems [C]. Bioceramics and Alternative Bearings in Joint Arthroplasty, Steinkopff, 2005, Session 3 : 113 - 115.
  • 8Keurentjes J C, Kuipers R M, Wever D J, et al. High incidence of squeaking in THA with alumina ceramic - on - ceramic bearings [ J ]. Clinical Orthopaedics and Related Research, 2008, 446(6): 1 438 - 1 443.
  • 9Yang C C, Kim R H, Dennis D A. The squeaking hip: a cause for concern - disagrees [J]. Orthopedics, 2007, 30 (9) :739 - 742.
  • 10Charnley J. Low friction arthroplasty of the hip [J]. Journal of Bone and Joint Surgery, 1972, 54-B(1) : 61.

二级参考文献32

  • 1Boutin P. Total arthroplasty of the hip by fritted aluminum prosthesis. Experimental study and Ist clinical applications. Rev Chit Orthop Reparatrice Appar Mot 1972;58(3):229-246.
  • 2Synder M. Drobniewski M, Kozlowski P, et al.Ceramic-ceramic articulation in uncemented total hip arthroplasty. Wiad Lek 2005;58 (3-4): 193-197.
  • 3Ha YC, Koo KH, Jeong ST, et al.Cementless alumina-on-alumina total hip arthroplasty in patients younger than 50 years: a 5-year minimum follow-up study. J Arthroplasty 2007;22(2):184-188.
  • 4Kraay MJ, Thomas RD, Rimnac CM, et aI.Zirconia versus Co-Cr femoral heads in total hip arthroplasty: early assessment of wear. Clin Orthop Relat Res 2006;453:86-90.
  • 5Zhou YS.Study on the possibility of silicon nitride-silicon nitride as a material for hip prostheses. Materials Science and Engineering 1997; C5:125-129.
  • 6Clarke IC, Good V, Williams P, et al.Ultra-low wear rates for rigid-on-rigid bearings in total hip replacements. Proc Inst Mech Eng [H] 2000;214(4):331-347.
  • 7Lancaster JG, Dowson D, Isaac GH, et al.The wear of ultra-high molecular weight polyethylene sliding on metallic and ceramic counterfaces representative of current femoral surfaces in joint replacement. Proc Inst Mech Eng [H] 1997;211 ( 1 ): 17-24.
  • 8Sedel L. Evolution of alumina-on-alumina implants: a review. Clin Orthop Relat Res 2000:(379):48-54.
  • 9Garino JECeramic-on-ceramic total hip arthroplasty, the USA experience bioceramics and alternative bearings in joint arthroplasty. Springer, Darm stadt 2006:249-252.
  • 10Friedman RJ, Black J, Galante JO, et al.Current concepts in orthopaedic biomaterials and implant fixation. Instr Course Lect 1994;43:233-255.

共引文献6

同被引文献64

  • 1宋杰光,王瑞花,王秀琴,富伟,李养良,马明亮,李世斌,纪岗昌.烧结工艺对氧化铝-铝金属陶瓷材料性能的影响[J].材料热处理学报,2015,36(2):17-20. 被引量:1
  • 2张健,安洪,周爱国,孟纯阳.保留股骨距的骨水泥型双动半髋人工关节置换治疗高龄转子间骨折[J].激光杂志,2006,27(3):94-95. 被引量:10
  • 3李智慧,何小凤,李运刚.功能梯度材料的研究现状[J].河北理工学院学报,2007,29(1):45-50. 被引量:15
  • 4张方杰,雷光华.金属对金属全髋关节置换术后体内金属离子对机体的影响[J].现代生物学进展,2011,1(13):2558-2561.
  • 5Rodeo SA,Maher SA, Hidaka C.What's new in orthopaedic research.J Bone Joint Surg Am. 2004; 86(9):2085-2095.
  • 6Thillemann TM,Pedersen AB,Mehnert F,et aI.The Risk of Revision After Primary Total Hip Arthroplasty Among Statin Users.J Bone Joint Surg Am. 2010;92(5): 1063- 1072.
  • 7Catelas I,Wimmer MA.New insights into wear and biological effects of metal-on-metal bearings.J Bone Joint Surg Am.2011;93(Supplement 2):76-83.
  • 8Landgraeber S,Von Knoch M,LSer F, et aI.ERCC1 expression in aseptic loosening after total hip replacement.J Biomed MaterRes Part A. 2010; 92(2):556-562.
  • 9Maya AEA,Grana DR, Hazarabedian A,et aI.Zr-Ti-Nb porous alloys for biomedical application.Mater Sci Eng C.2012;32(2):321-329.
  • 10Souza SA,Manicardi RB,Ferrandini PL,et aI.Effect of the addition of Ta on microstructure and properties of Ti-Nb alloys.J Alloy Compd.2010;504(2):330-340.

引证文献3

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部